I bought it just to try it…
160DOWT without Problems…
160DOWQ without Problems…
Need the Adapter for WT
For 35160WT, you need extra adapter and also to choose in options, you’ll have to connect this adapter on separate port…
Information confirmed by http://www.obdii365.com/wholesale/cg-pro-35106wt-adapter.html
tested on f30 6wa from 2016 with 35160wt
and f30 6wb fpk with 35160wt
only work with special 35160wt adapter not working with old 35080 adapter
I use CG PRO for 35160WT, Done a lot of BMWs up to 2019, only 1 that i could’t erase of all of them.
F30 you either need to do FEM to 0km with Yanhua ACDP or something else, or you use can filter in dash.
3). I already have successfully erased some 35160WT.
today erased a 6WA with 35160WT (not 160D0WT) from approx. 55.800km down to 16km without problems.
I used a CG-PRO software 126.96.36.199 with actual firmware.
I had good luck with 160DOWQ odometer reset, but you need to remove chip to do it. CG-Pro even erased mileage on a 160 that hextag couldn’t do. worth money, recommend it.
Successfully reset 6WB with 35160WT! Odo and VIN. Takes about 40 minutes.
I made a 35160WT easily with the first 2 lines. Not erased to 0 but to 16…. Was F-Serie F30 6WB 2018 make….
used the cg prog odo function with info to reduce to 16km not 0
From update log:
BMW 35080 V5 (35160WT) (Must use a dedicated 35160WT adapter)
CG Pro is the ONLY Chinese programmer working for 35160WT to read/write.
Here are the ST 35160WT chip list.
All should be done with a dedicated 35160WT adapter.
BMW 35080 V5 (35160WT)
On a side note,
But actually, they can only work for 35160WT read, NOT write.