What device to program 2022-2025 Fiat Ducato equipped with a Hightech AES ID4A transponder all keys lost?
Add key and AKL is possible via OBD port with FCA Stellantis and precoded dealer key.
With aftermarket tools the key learning is done first via bench reading.
Autel IM608/Xhorse won’t do it at the moment.
Pull out the BCM, read data with OBDSTAR G3+ MP001+ C4-09 adapter on bench mode.
Retrieve the PIN code with BCM dump.
OBDSTAR G3 will also program key. G3 can do the job but remote will not work as the precoding function doesn’t work correctly, only trasponder work, you can transfer data to avdi or zedfull to pre code correctly then learn keys in.
Note: Not all aftermarket programmers support correct key pre-coding, which will cause the remote control functions to remain inoperative after programming. For successful key pre-coding, use Abrites AVDI/Zedfull, which has been tested and verified by many.
Read the flash and EEPROM using Obdstar, apply the precoding with Abrites, and then write the data back; you need to perform this by connecting to the CAN bus from the right-hand side.
