How to Get Xtool VAG Access Code for VAG 4th 5th IMMO & MQB AKL?

With Xtool VAG Point Code, Xtool X100 PAD2, X100 PAD2 PRO / X100 PAD3/ A8 or H6A8 Pro or H6 Pro will be granted for calculation access via OBD2 for VAG 4th & 5th immobilizer systems and MQB-platform, for all keys lost (AKL) key programming i.e golf 7 2013. NO EEPROM REQUIRED!


During this process,  internet connection is required, so that Xtool Pad is able to connect to VAG servers and perform calculation. After the calculation is done, your tablet will have unlimited access to that same vehicle.


After ordered from, you will receive an email with your activation code. Keep this email handy, because you are supposed to enter the code at the time of programming.



Xtool VAG Point Code Operation Guide:

Tap ” the vehicle system”:

1). VW 4th Immobilizer System
Xtool Vag Point Card 01

2). Audi 5th Immobilizer System
Xtool Vag Point Card 02

Xtool Vag Point Card 03
3). Audi MQB Platform
Xtool Vag Point Card 04


  1. Tap ” Online Mode”.

Xtool Vag Point Card 05

  1. Receive a prompt “This password needs to be paid to get it, please contact your local dealer or Xtool. Just input your code.

Xtool Vag Point Card 06

  1. Upon inputting a valid code, the calculation will start. It will take 30 seconds to 3 minutes.

Xtool Vag Point Card 07

  1. If the calculation succeed, you will receive a message “Get data successfully!”
    Xtool Vag Point Card 08

If your internet was interrupted during the online calculation, you will receive a error screen (shown as below). Don’t worry, your VAG Point Code is still available to use if the calculation fails. Just have the second try to start the calculation using the same code.
Xtool Vag Point Card 09


  1. Upon getting a message “Get data successfully!”, you will be able to now add a key or perform all keys lost for VAG 4th / 5th IMMO & MQB immobilizer system.




Xtool Point Code is only for 10usd here: