How to do J-Link connection to CarProg programmer

Now make the J-Link connection to Carprog programmer according to the scheme and with the least possible piece of wire that is important

 

We open the program to go to options / project settings and put it all as the pictures

 

now file / open data file and select our new firmware

 

finally we select target / connect / program.

 

Jlink interface pinout JTAG

JLink_Interface_Pinout_JTAG

J-link to carprog

j-link-to-carprog-1

j-link-to-carprog-2

j-link-to-carprog-3

j-link-to-carprog-4

J-link configuration

j-link-configuration-1

j-link-configuration-2

j-link-configuration-3

program j-link

Step 1:

jtag speed before/after in: auto selection

jtag scan chain information: auto detection

deleted info configuration: ARM7TDMI core ….

APPLY

program-j-link-1

Step 2:

device: atmel …..

check core id

APPLY

program-j-link-2

Step 3:

Enable target power

APPLY

program-j-link-3

Step 4:

Select Target – connect

program-j-link-4

Step 5:

Select File – open data file…

program-j-link-5

program-j-link-6

Step 6:

Select Target and go to Program

program-j-link-7

Done!

OBDII365