Carprog Clone and Volvo S60 Dashboard: Confirmed!

Carprog programmer clone can be connected to Volvo dashboard (here S60) with an A1 adapter. And obviously you must repair A1 and/or main unit if you don’t have a genuine or HQ clone kit.

 

Volvo S60 dashboard test:

carprog-volvo-dashboard-1

carprog-volvo-dashboard-2

carprog-volvo-dashboard-3

carprog-volvo-dashboard-4

carprog-volvo-dashboard-5

carprog-volvo-dashboard-6

carprog-volvo-dashboard-7

carprog-volvo-dashboard-8

carprog-volvo-dashboard-9

carprog-volvo-dashboard-10

carprog-volvo-dashboard-11

carprog-volvo-dashboard-12

carprog-volvo-dashboard-13

carprog-volvo-dashboard-14

Carprog clone on Volvo S60: works good!

 

A1 adapter fix:

Check A1. You may need to improve the work can.

carprog-A1-rework

In detail…

http://blog.obdii365.com/2017/04/10/repair-carprog-a1-adapter-for-can-bus-communication/

If you think it not easy for you, spend $10 around to have a working one. $ buys relief.

http://www.obdii365.com/wholesale/a1-cable-for-carprog-full-v4-01.html

 

 

Carprog PCB rework:

 

First and most important of all is to change 74HC125D to 74HCT125M on your carparog, i have good clone (good pcb) but still did not read some I2C,95 ,MCU. I bought 74HCT125M at farnell change all 4 of them and it is ok now. reading without problems.

carprog-rework-1

carprog-rework-2

If it’s difficult for you or you fail to rework, perhaps you could buy a HQ Carprog programmer at the best price (Forget the cheapest!!! you will get what you pay for, especially for China clones)

carprog-8.21-china-clone-pcb-1

carprog-8.21-china-clone-pcb-2

Source: http://www.obdii365.com/wholesale/carprog-full.html

 

sales