V2018.12 BMW E/F Scanner (BMW-Explorer) has a possibility of record a key in BMW F01, F02, F03, F04 F07, F10, F11, F13, F18, F25 cars equipped with the CAS4 system and processors 9S12XDP512 and 9S12XEP100
To write down a key by means of BMW Explorer, you need the read Eeprom with CAS4
Having read and having kept Eeprom programmatory, it is possible to start record of keys.
It is necessary it will be convinced that your key is suitable for programming,
for this purpose we come into CAS further in the status of a key and we bring a key to the emergency coil on a steering column on the right side.
Bring a key to the emergency coil , You have to see
BMW Number has to be number of 7 symbols for example (9226939) – in the absence of these data the key isn’t suitable for record
VIN has to be in ЯЯЯЯЯЯЯЯЯЯЯЯЯЯЯЯЯ
Frequency of a key has to be 315, 434 or 868 – in the absence of these data the key isn’t suitable for record.
We start the BMW Explorer, we come into CAS
Further in an extra options
Further in an Key Learning
B the appeared window we choose Record of keys with the help Dump and press further,
the window will open as we see lower on the picture
We load Dump CAS4 read by means of a programmer
We choose a free key and we press the button to write down a key, and we bring a key to the emergency coil on a steering column
We wait for the end of procedure. Procedure lasts from about 5 to 60 seconds.
At successful record in the appeared window there will be instead of the 255th number of a key on which place you wrote down it, and also wines number of the Car.
After that we press to close.
The key is written down!
Before record it is necessary it will be convinced that the battery in a key is charged
It is necessary it will be convinced that keys are unblocked
It is necessary it will be convinced that the frequency of a key coincides with car frequency
Not to clean a key from the ignition coil before the end of procedure.