BDM Adapter+ KTAG 2.23 Write EDC17C46 VW Yeti 2014

I took some time to do a little review of these BDM connectors (China) for Ktag 2.23.
I have already received the shipment and I have time to test them without problems in Bosch EDC16U1 and in bosch EDC17c46. before using them I have reviewed almost all of these and I have not had any problem with the circuits, the lines or the solders of the pins. Someone mentioned that I had problems with resistance and fortunately I did not have these problems. So far all circuits and components are well installed and functioning as it should be.

Here I attach some photos where you can see how I start writing on a Bosch EDC17c46 ECU from Vw Yeti 2014

bdm-adpater-review-1 bdm-adpater-review-2 bdm-adpater-review-3 bdm-adpater-review-4 bdm-adpater-review-7

bdm-adpater-review-5 bdm-adpater-review-6 bdm-adpater-review-8 bdm-adpater-review-9 bdm-adpater-review-10 bdm-adpater-review-11 bdm-adpater-review-12 bdm-adpater-review-13

PS. the only thing I did not like is the connector for siemens pcr2.1.
I do not understand the connections very well since they do not coincide with the Ksuit scheme

 

 

I bought all from this seller: the bdm frame with adapters http://www.obdii365.com/wholesale/led-bdm-frame-for-ktag-kess-fgtech.html and the katg http://www.obdii365.com/

bdm-adpater-review-14

OBDII365