(03-04-2018) Download FORD VCM IDS 109.01+(Online+Offline) Calibration Native Install with Remote Support.
Ford IDS V109 link:
WINDOWS VISTA, WINDOWS 7, WINDOWS 8, WINDOWS 10
A 64 bit operating system is required. Virtualization also needs to be enabled on your computer / laptop, most modern systems come with this enabled, if you need to enable it, this can be done through the systems BIOS.
you can use it unlimited time
installation and activation service for FREE via obdii365.com
support online programming function also included calibration file
also included incode calculator for key programming or module installation
works on all vcm1-vcm2-vcmx nano original or clone…….
* Automatic vehicle recognition
* Read & Clear Diagnostic Trouble Codes (DTCs)
* Live Data-stream with Recording & Playback Functions for Main ECUs
* Guided Fault Finding
* New Software Re-flash for Existing ECUs
* Programming & Installation of new ECUs (PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps, etc.)
* Program New Keys (for additional fee)
* Injector Coding
* Set, Adjust or Remove Speed Governors
* DPF Regeneration
* Brake Bleeding
* Steering Angle Resets
* All Other Offline and online Dealer Functions
Ford IDS 109 Review:
109 start and work, VCM1 clone (but oldest one), Windows 7
Installation from clear Windows start, and for end
friendly, responsive, fast
make a great install to me on win 7. all I had to do is drink coffee during install. works perfect no limitation
Trusted seller. Installed and activated without problems. V109 + incode calculator. Windows 7 64bit and VCM1 original. Very happy.
Online programming work %100
Ford IDS 109 FAQs:
It VCM 1 is compatible?
Yes, it can work with Ford VCM 1 clone
Works good with VCM2 clone?
I have Chinese clone VCM2 SP177-C1 and it works great with impressive speed. I would definitely recommend this guy.
Hi how about Online ? It will be work with cloned VCMII ?
can do online , work with original and clone VCMs
So just to confirm the testman.exe and other DLLs in the Runtime folder are all v109? I’ve found that many other hacked versions are build using v106 and not all features work with 2017+ vehicles.
i know , some softwares can not work with 2017 cars , i know what to do for supporting 2017 cars .
i will change some files for it .
What is the price??? and where to?
$79.99 with free shipping, installation & activation service
Someone please test 2017 f150 key programming north america model
For F150 2017 need minimum IDS and NASTF account !!!
I have a vmware version of IDS 108.07, that appears to be built on 106 based on the file versions of a lot of the DLLs in the Runtime folder. Using a genuine VCM II with the 22.214.171.124 firmware, I canNOT do TCM module programming on a 2017.
Never tried TCM on 2017+ but that’s a possibility.
All hack I’ve seen are based on v86, v101 or v106.
Never seen a hack based on v109 executables and DLLs .. that’s why I’m asking but he won’t answer that question.
What vcm2 firmware are you using ??
My point is.. all “good” clone can upgrade firmware to 126.96.36.199 no problem.
On newer vehicle’s BCM replacement, the procedure requires to get configuration restored ( looks like JLR process ). After you done PMI of the said BCM you must complete that configuration restore or the BCM installation won’t be completed and so DTC will show up and/or the bcm won’t work correctly. I’m not talking about PATS functions which do need a dealer login or other tools to complete.
Once again my point is you do require firmware 188.8.131.52 for this procedure on most newer cars like 2015 + focus or escape and probably other model too. Running this procedure with 184.108.40.206 or older firmware will show error in the process.
Now that being said, if your software allow the use of 220.127.116.11 firmware, and has the v109 testman.exe and other executable files, then it should be working. But if you are using v86 testman.exe and other executable files and DLL with odler firmware, I strongly recommend not trying to install BCMs on newer car. And so other functionality might not work too.
Here is a bcm replacement failed with firmware 18.104.22.168 and IDS 107. Same I’d happening with v108 and v109. You do require newer firmware.