About: Simos PCR2.1 full flash
There are several parts included:
What is Simos PCR2.1?
What tool can read/write PCR2.1?
How to full read/write PCR2.1?
Which better for PCR2.1 read/write?
What is PCR2.1?
What tool can read/write PCR2.1?
1 VVDI Prog programmer
Vvdiprog reading full flash PCR2.1. Like on X17 or Smok.
2 Ktag and transdata
l use ktag and transdata and works fine , just make sure you only unlock once ie dont play around with it
Using Kess v2 v4.036 is working very well PCR2.1. read & write on the benchmark after unlock,not ktag or you can read thru obd with KESS..it will show you whether it is locked or unlocked…resistors boot only for unlock eeprom
4 Magic x17
Use Magic x17
No need to unlock or open pcr.
All via OBD now (since this week)
I did Reading, unlocking and writing with the FGTech_0475.
(but unlock in boot mode not by obd)
Everything is perfect !
How to full read/write PCR2.1?
Here, take Ktag as a flash tool. Full flash PCR2.1.
You need Pinout cable SSM 144300T111 (INFINEON TRICORE ECU PCR2.1 CABLE)
This is a SSM cable
Connection
Already DONE
Need original ktag or HQ cloned ktag 7.020, open ecu and prepare Eeprom for cloning ECU.
Which better for PCR2.1 read/write?
ksuite tools (kess or ktag) seem to be more stable than fgtech on pcr but work too
On ksuite tools , you can’t read or write with ktag , only unlock . (alientech need to work on it…)
with kess it’s ok , BUT , you can’t use the tricore module !
The trick to get communication error free on both fgtech and kess cable is to use a strong external psu .
good psu and obd home made bench cable , remove tricore module on kess v2 = 100% tested bench flashing solution for pcr2.1 .
In details…
http://blog.obdii365.com/2017/06/27/pcr-2-1-unlock-flash-with-fgtech-ktag-kess-v2/