If you are going to buy a used foxflash tool or sell your foxflash to another guy, how to transfer ownership? Here is the clue. You can read the instructions on foxflash official website: To transfer foxflash ownership, you… Continue Reading
What tool to program Porsche 2018+ smart keys? Depends on the key style. Old key: Applicable to old Porsche models Macan 2014-2023 Cayenne 2011-2017 Panamera 2010-2016 911 2013-2018 Boxster/Cayenne 2013-2016 718 2016-2023 these models use old key.… Continue Reading
How to use the CG FC200 ecu programmer to read and write EDC17CP44 ECU. It’s from an Audi car. This ECU has some internal damage on the unit but it’s working to be able to read and write. Here we… Continue Reading
What is the difference between Autel MaxiAP AP200 and new AP2500E/AP2500 Bluetooth obd2 scanner? Autel AP200 Autel AP2500E Model Coverage More than 60 brands More than 60 brands CAN FD protocol No Yes Full OBDII functions Yes Yes All… Continue Reading
Alientech KESS3 world exclusive! Reprogram via OBD on some models within the Suzuki range with the Bosch MED17.9.63 engine control unit. UPGRADE 1.82 Work on Suzuki Baleno, Swift, SX-4, and Vitara, thanks to the new Virtual Reading protocol for KESS3.… Continue Reading
Jaguar Land rover programming tool which is better? JLR Topix Cloud, JLR Pluto or Jet Master? Hardware: Pathfinder Topix Cloud: require original JLR DoIP VCI or only some 3rd party VCIs, i.e VNCI JLR DoIP Shut down server for many… Continue Reading
Good news! VNCI JLR DoIP diagnostic interface tested working with Topix Cloud online programming. Device is compatible with original driver and software (both SDD and Pathfinder.) VNCI JLR is plug-and-play. Don’t need 3rd party driver. using JLR original… Continue Reading
What is the difference between the new VXDIAG VCX FD (VCX CAN FD) series, VCX SE, VCX DoIP and VCX NANO series? Check the table comparison below: Item VXDIAG VCX FD VXDIAG VCX DoIP VXDIAG VCX SE VXDIAG VCX… Continue Reading
Today we are going to clone the E92 ECM module with the OBDSTAR DC706 and also reset the immobilizer. That means you can get your used E92 ECMs. You don’t need to buy a new module anymore. We are going… Continue Reading
Xtool immo tablets can read immo data from VAG MQB NEC35XX Continental/VDO clusters by OBD. For example: Use xtool x100 pad3 SE i read cluster from skoda fabia MQB nec35xx by obd but you must wait 10min to unlock… Continue Reading
What’s the difference between 2024 new Launch i-TPMS and the previous TSGUN TPMS service tool? They have the same functions. Support all 315/433MHz sensors activation, programming, relearning and Diagnostics. TSGUN: must be combined with Launch X431 scanners to perform… Continue Reading
Question: Is it possible to clone PSA Citroen Peugeot VALEO VD46.1 and VD56.1 ECU with Alientech KESS3? Is OBD safe for PSA Group ECU Valeo Vd46.1 or VD56.1? Answer: You can read and clone VD46.1 with no problem. Copy… Continue Reading
ECM TITANIUM is the recalibration software developed by Alientech, which allows you to view and modify, independently, the management parameters of any engine calibration file and automatic transmission. With ECM TITANIUM you have at your disposal a database of more… Continue Reading
Is it safe obd on Ford/PSA SID208 and SID209 ECU with Alientech KESS3? Yes, it is safe, Our customers done a lot of Transit and Ranger adblue/dpf/egr etc…no issue. Kess 3 with battery stabiliser, SID208 or 209 don’t like battery… Continue Reading
To provide an improved experience for our users and more streamlined access to OEM repair information, Autel has partnered with MOTOR TruSpeed. ‘TruSpeed Repair’ is coming to the Autel MaxiSYS ULTRA Series, MS919, and MS909.and more. TruSpeed Repair Information… Continue Reading
