There are two ways to program Nissan Rogue T33 or Mitsubishi Outlander 2022+ proximity all keys lost with Autel IM508/IM608.
Method 1: Use Autel IM608 + Nissan 40 PIN Cable
Method 2: Use Autel IM608 + APB131 Adapter
Here is user’s working experience.
“I just did a 2023 Nissan Rogue with the Autel IM608 and Obdstar 40 pin cable. It pulled data from HFM (Hands Free Module) automatically thru the 40 pin cable and acquired the 28 digit pin code. The only problem was the remote buttons were not lined up for the function and it was an aftermarket key so it couldn’t be adjusted. When I pressed start I got Lock and Lock did unlock, Panic was fine but trunk and remote start didn’t work. Gonna order an OEM key. The proximity and starting worked fine.
I didn’t expect it to work without getting the pin somewhere else. I just went into immo status scan which is on the same menu as control unit. I clicked add key Guided at bottom of screen, I had to manually enter the VIN, then next it said getting pin. On the new body style, do not use auto scan. Go through and manually select the vehicle. Input the vin number when it tell you and you will be good to go.
I was confused because I already hacked the HFM module to get the PIN with the XP400 Pro and I figured it would ask for the PIN like it did a few months ago when I first tried this car. It proceeded to download the HFM on its own and called home to autel to decrypt the PIN from the data it acquired. It posted the PIN on the screen, the same PIN I acquired from dumping the HFM manually with the APB131 adapter. It then went thru the normal procedure to tap keys on the button and I was able to add the new key. So apparently Autel has updated and figured out how to get the pin thru the 40 pin cable directly now. My Nissan is V5.00 software version“.
Here is an example.
Program Nissan Rogue 2023 smart key (add a key) with Autel IM508 & OBDSTAR 40 pin cable.
This is a 2023 Nissan Rogue, customer just boght it they don’t have a second key for it.
We try to program an OEM key to it. We got the OBDSTAR Nissan cable. The gateway module is under the instrument cluster on the driver side.
Take this fuse panel or fuse block out and then you will see the 40 pin connector of the HFM module.
It is not the black connector, it is the gray connector. Here we connect OBDSTAR Nissan 40 PIN cable.
Manual select vehicle model and year. Do not do auto scan on these.
Go to IMMO Status scan->Add key (guided).
You put the key to get PIN verification, then you just go through the programming procedure.
Make sure when you are doing this you do not have the ignition on when you disconnect these connectors.
Make sure you disconnect everything with the ignition off.
Another customer just did a Mitsubishi Outlander 2023 all smart keys lost using Autel and Lonsdor Nissan 40 pin cable. It’s the same thing as a Nissan Rogue. You need to bypass pin code with 40-PIN gateway adapter. lonsdor cable works well also. Do manual selection on these cars and input the vin number. Do not do auto scan on these. Manually input year make and model, and it will ask for the vin during the programming process. Good luck and happy programming!!
If need to read Nissan Rogue 2022+ pin code from HFM dump, follow the similar procedure here
How to Read Nissan Rogue Sentra AKL 28-Digit PIN with Autel IM608 APB131