OBDSTAR DC706 ecu flasher released an important update in May 2023- Adding GPEC2, GPEC2A, GPEC3 and GPEC4 read and write in boot mode.
No more flex, hptuner or dimsport, dc706 can do it yourself, full reading and writing.
V30.08 software adds the following GPEC types:
CHRYSLER CONTINENTAL GPEC2 MPC5566+95320
CHRYSLER CONTINENTAL GPEC2A MPC5674F+25320
CHRYSLER CONTINENTAL GPEC3 MPC5674F
DODGE CONTINENTAL GPEC2 MPC5566+95320
DODGE CONTINENTAL GPEC2A MPC5674F+25320
DODGE CONTINENTAL GPEC3 MPC5674F
FIAT CONTINENTAL GPEC2 MPC5566+95320
FIAT CONTINENTAL GPEC3 MPC5674F
JEEP CONTINENTAL GPEC2 MPC5566+95320
JEEP CONTINENTAL GPEC2A MPC5674F+25320
JEEP CONTINENTAL GPEC3 MPC5674F
JEEP CONTINENTAL GPEC4 MPC5674F+25320
LANCIA CONTINENTAL GPEC2 MPC5566+95320
VOLKSWAGEN(VW) CONTINENTAL GPEC2 MPC5566+95320
Read showflash (except VW GPEC2)
*DC706 will clone these GPEC ECUs but not unlock them.
DC706 will show you the wiring diagram and instructions. P003 adapter is required to clone GPEC series.
OBDSTAR DC706 read/write GPEC2 in boot
DC706 clone Chrysler Continental GPEC3 MPC5674F in boot
3). DC706 read GPEC2A in boot without problem
I just did a gpec2a and got the extra power I used the white wire that’s says IGN it’s a switched 12v power supply so that gave me 3 powers and I was able to clone it that way.
DC706 also read 7G 8GF 9GF 10GF, GM T87, T8A and much more ECU/TCUs which were only available for Flex, B-flash etc. Now you can do it by DC706.
More updates coming- EMS3110, EMS3120, EMS3125 from Renault.