Autel Make CAS4 key with Godiag GT100 breakout box

The purpose to use Godiag GT100 breakout box with Autel is that its indicators will flash if Autel has a good communication with the CAS4 ECU box.

 

Look at the following image:

-The left one is Godiag GT100 breakout box;

-The testing platform is the middle parts (red pcb with a switch, 2 black adapters, 1 key coil). It will be a new testing platform with a shell made by obdii365.com engineer.

– The right one is CAS4 ECU box.

– Another one is Autel key programmer i.e IM608 /IM508 ( in the image it is a code reader because the IM608 is temporarily loaned out by my friend)

Autel Make Cas4 Key With Godiag Gt100 01

Press the switch of testing platform, it will flash, when you put a working key into the coil, it will keep flashing.

Autel Make Cas4 Key With Godiag Gt100 02

 

The indicators on the Godiag GT100 breakout box will flash to indicator the CAS4 ECU is communicating fine with Autel.

Autel Make Cas4 Key With Godiag Gt100 03

 

Okay, next is to operate on Autel key programmer by following the on-screen instructions.

Video guide :how to use AUTEL MD808 PRO to read CAS4 ECU fault code with GODIAG GT100 

Enjoy!

 

www.obdii365.com

sales