Here are VVDI Benz factory engineer solution to new Mercedes Benz W221 and W204 all key lost.
I.W221 ALL KEY LOST
Q: I bought EIS W221 lock with a key from the lock from one machine. I have read the PSW. I will make a complete loss of W221 key in the future?
Describe step by step procedure
A: you have used/seconds-hand EIS with working key,you can do like this for W221 all key lost
1.read all key lost EIS data-> save EIS data
2.read used EIS data enter password,get erase password->renew used EIS.
3.load step1 EIS data to renewed EIS with password->write EIS data
4.load EIS data(with key password)->prepare key file
5.input new key to device IR reader->load key file->write
6.insert new key to EIS->EIS will learn the new key->key learn success
by the way,if your all key lost W221 is motorola EIS,not need to change EIS,remove eis get eeprom by programmer( Xhorse VVDI PROG).
then load eeprom to VVDI MB BGA TOOL prepare key file.
II. W204 ALL KEY LOST
Q: I have a w204 All key lost and i program a new EIS with VVDI MB Tool, the ignition doesn’t come on or crank, but the steering can lock and unlock. can someone guide me what to do?
A: W204 all key lost(change new EIS),refer to following steps,maybe helpful:
1.Read EIS data via obd,then Save EIS data
2.adapt ESL:Read ESL data->Get Erase Password->Renew ESL
3.Change new EIS, Load EIS data(step1)->write Key Password(enter manually and at random)->Write EIS data
4.Personalize W204 ESL
5.Load EIS data(with Key Password)->Prepare Key File
6.Input new Key to device IR reader->Load Key file->write
7.Insert new Key to EIS->EIS will learn the new key->key learn success.
You are at you own risk if you are not familiar with VVDI Benz key programmer.