Today we will share a fast and convenient way to install BMW Standard tools for the INPA K+DCAN usb interface. Download the software archives: INPA Driver for the k+dcan cable itself Unzip BimmerGeeks Standard Tools. In the folder we find St212.exe,… Continue Reading
Here, you will get answers to questions below: It is possible to use an “old” vcds or vagcom kkl cabel and use it for newer bmw (2004-2011) with the software inpa? Only short the Pin 7&8 from my vcds cable,… Continue Reading
The BMW Coding Tool 2.50 allows you to update your SP-DATEN (Data files) automatically instead of manually installing the files by copy and pasting files. It will automatically update the files that require replacing and skip the files that you… Continue Reading
When I go to work today, I open my laptop and connect BMW K+Dcan cable to my car, but I get an error when I try to read another module other than CAS of ECU module… I have a problem with the ncs… Continue Reading
What is K+DCAN cable with switch: It’s a BMW K+Dcan usb cable, the 2018 version. In detail… Look here: A new switch is added, compared to the traditional Dcan cable. the switch on this cable to LEFT is for… Continue Reading
Have spent my entire Saturday on this: All running on XP and also tried on Win7 x64 INPA is working fine. Battery and ignition both ON When running NCS Expert, try to read the VIN from ECU i get VIN… Continue Reading
So what would be the difference between NT510 multi-system scanner and Carly app in terms of diagnostics? I know coding wise there are pros and cons between them. Carly can read and clear codes, also can register batteries at $15… Continue Reading
Here we discuss the differences of K can vs D can cables vs Icom emulators, ideas of what the hardware&software, protocol, car and function differences. BMW tools ICOM (icom, icom a2, icom next) INPA K+DCAN cable DCAN K-line Cars… Continue Reading
Share are two common methods to complete Halogen to LED DRL conversion, one with NCS expert and the other by hardwire. Follow at your own risk! Method 1 – Use NCS expert to get the halogen light angel eyes… Continue Reading
This post starts with BMW 330D steering angle sensor problem that after it replaced the 2 orange lights just keep coming back on. Then I was told to use Inpa read out fault code and NCS expert to code the… Continue Reading
This is a little NCS expert software tutorial on coding BMW E46. Aim to help if anyone has any questions and of course can carry out any coding changes. Equipment: NCS expert coding software A hardware cable (BMW INPA… Continue Reading
