The APB131 adapter is compatible not only with AUTEL MaxiIM IM508/IM608 devices but also with OTOFIX IM1/IM2 equipment. Today, we’ll share user feedback and demonstrate how to add a key using the OTOFIX IM2 and APB131. The process is similar to that of the IM608.
It is a Audi Q3 F3 2020. The car was delivered with one key, need to add a spare key.
Immobilizer data is stored in the dashboard. The task is to add a spare key to this model with OTOFIX IM2 key programmer.
The process of removing the instrument panel was short, you only need to disassemble half the dashboard and soon it was already lying on the table.
Cluster number: 83A 920 800 B
Processor
In this case, you need the Apb131 adapter (MQB-V850/RH850).
We connected it, supplied additional power to the programmer, and in 7-10 minutes the file was ready.
This file needs to be saved, then select “Immo-data” and add the saved file there. After that, you will have the CS and Mac code.
The next step is to prepare the dealer key (2 keys).
Then in the menu you need to perform the learning, which is also called “Key adaptation”. On the instrument panel at the bottom, there will be 0/3. Then we apply the keys to the immobilizer coil one by one until there is 3/3.
Read also:
Program Skoda Kodiaq 2017-2021 RH850 MQB Smart Key with Autel IM608 and APB131
