Yanhua Mini ACDP released a new interface board for VAG MQB 5D instrument clusters.
This interface board requires module 34 authorization.
Function: Mileage correction only.
Support models (not limited to)
Golf 8, Teramont, Viloran, Tavendor, Lamando, Tiguan L…
Support cluster numbers:
5GD920340A, 5GD920340C, 5HG920340, 5HG920340A, 5HG920340B, 5HG920340C, 5H0920340A, 3JD920340…
Supports chip models:
R7F701401, R7F701421
Feature:
No soldering. No need to remove capacitors.
How to Install Yanhua ACDP MQB 5D Interface Board?
1.Find the interface board installation area on the instrument according to the visual
positioning mark on the interface board.
2. Remove the corresponding two screws
3. Locate the D1-D4 positioning holes correctly on the instrument panel
4. Align the interface board with the screw fastener holes and D1, D2 positioning points
5. Press down on the interface board
6. Tighten the screws
7. Confirm again that the interface board D1, D2 positioning pins are completely aligned with the D1, D2 positioning holes of the instrument.
Finish installing the 5D interface board.
Run ACDP software, go to VW->VW MQB IMMO (ODO)-> MQB function, select MQB48/49 ODO- Method 2 (R7F7014xx 5A/5C/5D) option. Follow ACDP app prompts to correct mileage for 5D clusters.
Note: ACDP only corrects mileage for 5C and 5D clusters. It cannot decode immo data.
