How to Repair Renault Logan EMS3132 ECM if Car Not Start?

It is a Renault Logan, the car stops starting.

The repair is not difficult.

Renault Logan EMS3132 ECM Repair 1
It is not difficult to disassemble the ECM (Continental EMS3132).

The cover is held on with sealant. We bend the cover clamps, heat it with a hair dryer and remove it.

Dismantle the damaged elements, remove the old tin and clean.

Renault Logan EMS3132 ECM Repair 3

Renault Logan EMS3132 ECM Repair 4

Renault Logan EMS3132 ECM Repair 5

Resistors and then transistors often burn out on these units, but in this case, the resistors burn out.
The hardest part was finding the resistors.
Install new components and reassemble with sealant.

 

Melf resistors are used here.

Marking of ignition coil transistors ST GB10NB37LZ
Resistors 0.22 ohm X 4 pcs.

Renault Logan EMS3132 ECM Repair 6

Renault Logan EMS3132 ECM Repair 7

Renault Logan EMS3132 ECM Repair 8

If need to do Renault EMS3132 IMMO Off, choose I/O Terminal or OBDSTAR DC706.

 

Renault EMS3132 IMMO OFF with OBDSTAR DC706

OBDII365