Has anyone used the Autel J2534 Maxiflash Elite/JVCI/VCMI with any Nissan software? Does it work with Nissan Consult III Plus or Consult R2R?
Consult III Plus: No, got it downloaded and it doesn’t find the j2534. It never connects to the autel j2534. It doesn’t find it in the VI/MI selection then manually added it in the diagnostictool.ini. Tried modifying the registry no dice.
Consult 3 Plus R2R: R2R yes, regular Consult no
NERS: Yes, no problem.
->>>Check: Nissan Consult III Plus vs Nissan Consult III R2R vs NERS
How to set up Autel J2534 for Nissan online programming?
Visit Nissan-techinfo.com
Select registre reion, i.e North America
The first you need to do is create an online account.
You are going to have purchase diagnostic in order to download the diagnostic software.
What you are going to have to do is log in.
After log in you come up to the main screen onto the home page.
Press the Diagnostic Software button.
That will bring you to another page.
There are two types of diagnostic software that you can actually purchase- Consult III Plus and Consult III Plus R2R.
We would suggest the Consult 3 plus R2R which works fine with Autel J2534 as we said in the beginning.
It works with your Jbox. You can do programming and calibration updates and everything with the software.
You can buy 1 day subscription ($30). Be careful, 1 day subscription is just a regular Consult Plus R2R and then you also have the GTR version.
The GTR 1 day subscription is a little bit more expensive.
You also have 30 days subscription ($150).
If you are doing to do more cars, 30 day subscription actually save a little bit of money.
If the R2R is not what you are looking for and you don’t need the Consult III plus diagnostic software.
What you can do is you can come and click over where it.
Come down and select Reprogramming using J2534-1
It is going to bring you to another page. On this page where you buy the NERS software.
Now this costs $350 to buy but this version gives you one year of access.
You download files afterward If you are not doing anything post 2017, if you are doing older version Nissan vehicles, there is a free version of NERS on the internet. But it only does up to 2016.
If you want to do 2017 and up you are going to need this version 4.03. You cannot have both versions of NERS into the system.
Then Let’s go to Reprogramming
Enter first 5 digits of ECU part number and last 5 digit of ECU part number
Submit and purchase ECU data file.
Then download ECU files.
Download and extract reprogramming data you downloaded from Nissan official.
Then you download Autel MaxiSuite driver for J2534 passthru interfaces on PC.
Here is an example
Download and Install Autel IM608 JVCI J2534 Driver for OEM Software
Connect Autel Jbox with vehicle
Select Nissan J2534 ECU reprogramming software
Accept terms and conditions
Select your Autel maxiflash interface Elite/Pro, JVCI, VCI, VCMI
Here we use MaxiFlash Elite/Pro
Now you can start Reprogramming, Write/Modify VIN, configure and programing modules.
Follow software instructions until finished.