Bmw MSD85 reading and writhing work 100% done with foxflash programmer.
Foxflash got 2 versions of pinouts
SIEMENS MSD85 Version 1 [ TC1796 INT-EXT.F.] – BMW
Kit to use:
– Multifunction cable
– 3 resistances of 1000 Ω
– 1 resistance of 2700 Ω
– OBD Cable (if password is searched on car)
Step 1.Password Search
To find the password, connect via OBD to the car.
Use the driver:
→ TOOLS BOOT MODE
→ INFINEON TRICORE Tool Password
→ OBD PASSWORD MSD80/81/85/87 BMW
→ Click on “Find Password” and follow the software messages.
The password can also be found on the desk by connecting the following pinout.
Now that the password has been found it’s possible to read and write the control unit. See next step.
Step 2. Read and Write ECU
Connect with the multifunction cable the following pinout and the boot shown below.
Use the driver:
→ TOOLS BOOT MODE
→ INFINEON TRICORE Boot
→ SAK TC1796
The boot connection on next image
SIEMENS MSD85 Version 2 [ TC1796 INT-EXT.F.] – BMW Foxflash Pinout
Kit to use:
– Multifunction cable
– 3 resistances of 1000 Ω
– 1 resistance of 2700 Ω
– OBD Cable (if password is searched on car)
Step 1: Password Search
To find the password, connect via OBD to the car.
Use the driver:
→ TOOLS BOOT MODE
→ INFINEON TRICORE Tool Password
→ OBD PASSWORD MSD80/81/85/87 BMW
→ Click on “Find Password” and follow the software messages.
The password can also be found on the desk by connecting the following pinout.
Now that the password has been found it’s possible to read and write the control unit. See next step
Step 2: Read and Write ECU
Connect with the multifunction cable the following pinout and the boot shown below.
Use the driver:
→ TOOLS BOOT MODE
→ INFINEON TRICORE Boot
→ SAK TC1796
The boot connection on next image
