Yanhua Mini ACDP + ISN Module + N20 interface board are capable of reading isn mg1 ecu
Build date 2020-09, 2021 bmw m5 comp, VIN: WBS83CH01MCFXXXXX. The ECU model is S63B44T4.
Good to know: N20 interface board is applied to N20\N13\S63 ECU model.
Prepare and hardware connection:
- For S63 (MEVD172H) and S63 (MEVD1728), here are 4 steps to prepare.
Step 1. Please prepare ACDP, OBP+ICP adapter, interface board and DME.
Step 2. Connect the interface board correctly to the DME interface as shown.
Step 3. Short the CAN resistor on the OBP + ICP adapter to the “CAN-R Join”.
Step 4. Connect ACDP, OBP+ICP adapter, interface board and DME.
- S63 (MG1CS201), here are are 4 steps to prepare
PS: if the ECU model is B48, please use B48 interface board.
Step 1. Please prepare ACDP, OBP+ICP adapter, interface board and DME.
Step 2. Connect the interface board correctly to the DME interface as shown.
Step 3. Short the CAN resistor on the OBP + ICP adapter to the “CAN-R Join”.
Step 4. Connect ACDP, OBP+ICP adapter, interface board and DME.
Next is the operation on Yanhua Mini ACDP APP.
Click on “BMW”.
Click on “DME ISN”.
Click on “Bench Mode Read /Write DME ISN”.
Click on “Fxx”.
Scroll down and you will see S63 (MEVD172H), S63 (MEVD1728), S63 (MG1CS201).
For S63 (MEVD172H), it supports “Identify” and “Read /write ISN”;
For S63 (MEVD1728), it supports “Identify” and “Read /write ISN”;
For S63 (MG1CS201), it supports “Identify” and “Read ISN”;
Next is to follow the on-screen guide to operate.
…
Alright, this is how to use Yanhua Mini ACDP to Identify, Read and write ISN for BMW S63.
