Fgtech Galletto V54 master EU version with firmware 0475 is now available in obdii365.com. The FGTech FW0475 was based FGTech Galletto 4 FW0386,inherited most features of older version,yet,at the same time,it made some improvements to provide better and more stable working conditions.
Firmware Version:0475; Software version: V54 2012/02
Compatible: cars (12V), trucks (24V), motorcycles, Marine, BDM MPCxx, BDM Boot Mode, checksum.
Unlock version, can use directly, no need to activate.
Add BDM Function/ Tricore/OBD K-CAN
Original FR232 USB bridge and relays
Support Online Operation. (There will be no damage when connecting to internet)
– No crack needed
– No more clock returning
– Tested with several anti virus, anti malware, etc.
– No viruses, malware etc.
– No keygan needed
– No serial needed
After installation, just connect your device and start the software.
FGTECH Galletto v54 not need crack for Tool:0475 Software Free Download :
OBD driver SSang-yong Del-phy DCM3.7 Read/Write, Checksum
OBD driver for Fer-rari 458 Italia MED9.6 Ecu Master and ECU Slave Read/Write, Checksum
OBD driver for Fi-at/Al-fa/Lan-cia Twi-nair/Mult-iair 8GMF and 8GSF Read/Write, Checksum
OBD driver for Ma-zda 5, Ma-zda 6 2.0 Diesel ECU RF8x Read/Write, Checksum
OBD driver for Ma-zda 5, Ma-zda 6 2.0 Diesel ECU RF7x Read/Write, Checksum
OBD driver for Sim-os 10.xx VA-G 1.2 TSI Read/Write, Checksum
OBD driver for CRD 3.xx Merc-edes 2200 CDI Read/Write, Checksum
Simos PCR2.1 VA-G 1.6 TDI Unlock Boot Tool – Read/Write EEPROM
OBD driver Sim-os PCR2.1 VA-G 1.6 TDI Read/Write, Checksum
RSA recognition Peu-geot Bip-per
RSA recognition Citr-oen Ne-mo
OBD driver Driver for writing Bo-sch EDC16C34/5 Peu-geot Bip-per Read/Write, Checksum
OBD drive Driver for writing Bo-sch EDC16C34/5 Citr-oen Ne-mo Read/Write, Checksum
OBD driver Del-phi DCM3.5 for Ta-ta Sa-fari Read/Write, Checksum
Checksum recognition for DCM3.7 Ssan-gyong
Checksum recognition for DCM3.7 Op-el and Sa-ab
Checksum recognition for DCM3.7 Ki-a and Hyu-ndai
Boot Visteon ST10F275 RX-TX Mode
Boot ME7.9.10 ST10F275 RX-TX Mode
Checksum recognition for Denso Sub-aru Tri-beca
Boot Mitsu-bishi MH7203 Hyu-ndai
Checksum recognition for Denso Nis-san L200
Checksum recognition for Denso Nis-san X-Trail
OBD driver Op-el Simtec75 CAN Read/Write, Checksum
OBD driver Pors-che SDI3 CAN Read/Write, Checksum
Cor-vette Utility CAN for change VIN, Code Align, Erase Errors
Corette Utility VPN for change VIN, Code Align, Erase Errors
OBD driver Reault SID305 CAN Read/Write, Checksum
OBD driver Masrati ME9 CAN Read/Write, Checksum
Tool Boot Hitaci Phase 3
Tool Boot Hitaci Phase 2
OBD driver Fi-at ME17.31 CAN Read/Write, Checksum
Boot Mits-ubishi for L200 MH8102F
Boot Mitsu-bishi for Lan-cer EVO MH7202
Fi-at MJ8DF CAN Serial Injectors
Fi-at MJ8DF CAN Serial Injectors
OBD driver Fi-at MJ8DF CAN Read/Write, Checksum
OBD driver Fi-at MJ8DF K-line Read/Write, Checksum
OBD driver Merc-edes Del-phi CRD2.xx CAN Read/Write, Checksum
OBD driver Fo-rd Del-phi DCM3.5 CAN Read/Write, Checksum
OBD driver PS-A Delp-hi DCM3.5 CAN Read/Write, Checksum
OBD driver VA-G Sim-os 3xx Boot mode 29F400 C167 Read/Write, Checksum
OBD driver VA-G Sim-os 9.1 Boot mode 29F400 C167 Read/Write, Checksum
OBD driver VA-G Sim-os 7.1 Boot mode 29F400 C167 Read/Write, Checksum
OBD driver VA-G Sim-os 33 K-line serial Read/Write, Checksum
OBD driver VA-G Sim-os 32 K-line serial Read/Write, Checksum
OBD driver VA-G Sim-os 3PG K-line serial Read/Write, Checksum
OBD driver VA-G Sim-os 3PE K-line serial Read/Write, Checksum
OBD driver VA-G Sim-os 3PD K-line serial Read/Write, Checksum
OBD driver VA-G Sim-os 3PC K-line serial Read/Write, Checksum
OBD driver VA-G Sim-os 3PA K-line serial Read/Write, Checksum
OBD driver VA-G Sim-os 9.1 K-line Read/Write, Checksum
New password Triore Tprot V08-10
OBD driver Ren-ault Val-eo V40, Read/Write, Checksum
Boot Mode System:
NEW JTAG – BDM – MOT – FREESCALE:
1.Freescale MPC 5553/5554/5565/5566 NEXSUS PORT New IAW MJD 8F2 – Mair 8GMF
2.New Delphy DCM3.5xx DCM3.7xx TRW
3.MOT Free scale MPC 555/556/561/562/563/564/565
4.MOT MC 68332 – MC YQQCU – MC 68377 Trionic 5/7/8 For GM- For OPEL- For SAAB
5.MOT MC 68376 Campi 01 for Lamborghini – Lotus
6.MOT MC 68336 MEMS D5
7.MOT ZC 439615 – ZC 439507 IAW For FIAT – VAG
8.New Line OBD protocols VPM for GM Hummer-Corvette-Munstang-Blazer-Cadilac
9.New Line OBD protocols Tx-Rx – for Subaru – For Mitsubischi – For Hitachi – For Denso ecu
10.All EDC17 MED17 is good always modify with Boot Mode
1.Recovery Mode Completa
2.Funzione scan tool per eliminare i DTC
3.Function scan tool for erase the DTC
4.Controllo tensione di batteria auto in tempo reale
5.Check tension of battery car in real time
All old protocols included for Bosch MExx / EDCxx / Marelli / Siemens / Delpy / Lucas / Denso
Boot Mode C167x / ST10, Boot Mode With password for Bosch, Siemens
MOT MC68332 – MCYQQCU – MC68377, MC68376, MC68336, ZC439615, ZC439507
MOT Freescale MPC 555/556/561/562/563/564/565
Freescale MPC 5553/5554/5565/5566
5-30V Car / Industrial Vehicles, L line / K line KWP, CAN
Can Bus V2.0 50Kb > 1000Kb
J1850 VPW PWM for GM For FORD
Rx Tx RS232,
Automatic setup Pull up K-L line 250, 500, 1000 ohm,
Automatic setup termination Can bus 0, 60,120 ohm,
KESS 5.017 China vs Fgtech V54 O475FW
1.Read and write the data of Engine ECU.
2.Supported World-wide famous brand cars,trucks.
3.Supported Multi Languages.
4.Easy to use,100% working.
- Developed by different team.
- KESS V2 5.017 Ksuite 2.23 has launched for ages,while the Fgtech Galletto V54 0475 ECU Programmer incoming.
- Connection : 5.017 KESS V2 Master via obd2 port,FGTech Galletto 4 V54 both via BDM and OBD.
- Window System : galletto v54 0475 only for Window 7 system, KESS 5.017 China for XP/WIN7/WIN8.
- KESS 5.017 Ksuite 2.23 has anti mediation lock module,it can do new and encrypted cars better than Fgtech Galletto V54.
- 0475 Fgtech Galletto V54 Supports Tricore Function.
Both of KESS V2 5.017 Master and Galletto V54 0475 ECU Programmer are two great tools,and i belive,later,there will be more and more updated news released out for Fgtech Galletto 4 Master V54 0475,maybe it will help you better find answers.
FGTECH FW0475 Install/User Note
1 When you install it,you can keep online,but please close all anti-virus software.
2 Our Version has fixed all unstable problem and errors,and also tested it on both cars and trucks.
3 This version is newest firmware 0475,the software version is 2012v,but not same as old fgtech,cannot work on old fgtech,please notice,if your CD is broken,you can ask us for software download link.With original FR232 USB bridge and relays.
Step-by-step Fgtech 0475 software installation
Q1 : Is the FGTech 0475 Reworked from o386 ?
A1 : Yeah,it is,but it is the improved and updated version of FGTech Galletto 0386 with new features and functions and can support more vehicles.
Q2 : What is the advantage of 2017 newest FGTech V0475 ?
A2 : Newest Version V0475 FGTech Galletto 4 supports online operation,no tokens limited and can read and write vehicles via OBDII and BDM.it is a cheap but amazing s ECU Programmer for all cars , trucks , motorcycles,Marine,BDM MPCxx,BDM Boot Mode,checksum.
Q3 : Can V2012 Software suit for both new and older version FGTech ?
A3 : No, it is not same as old fgtech,cannot work on old fgtech,please notice,if your CD is broken,you can ask us for software download link.With original FR232 USB bridge and relays.
Q4 : What is the price for FGTech Galletto 4 Master V54 0475 ?
A4 : You can give obdii365.com a shot, $99USD + free DHL shipping and the FGTech has been tested before shipping out.
Q5 : Which vehicles can be programmed by NEW FGTech V0475 ?
A5 : you can check the compatibility list in Part 3 above.
stable and easy to use,100% workable,see the tested ok car models feedbacks by OBDII365.com customers
1.) EDC16U34 (03G 906 021 PD) via obd2 r/w caddy 2010 1.9tdi
2.) Z10XE Opel Corsa 1.0 (ME1.5.5) on the bench r/w
3.) Z18XE Opel Zafira Simtec 90 71.1 r/w (24kb file!!!) on the bench
4.) Fiat Stilo 1.6 16v 2001y ecu 5NF.T1 via OBD2, on the bench via K line r/w
5.) Land Rover 2.0 td4 diesel DDE4 Bosch r/w via OBD2
6.) EDC16U1 r/w via OBD2 Touran 1.9TDi, Seat Altea 1.9 tdi
7.) Delphy DCM3.4 Pezo 308 2.0 HDi 2007 via OBD2 (W not tested, just R)
8.) EDC16C3 via OBD2 ok, full BDM on the bench r/w (grand vitara 1.9DDiS, 2007)
9.) EDC15 PD 1.9 passat via OBD2 r/w
10.) EDC15C2 Peugeot 406 restyl 2.0 HDI 2004 via OBD2 r/w
11.) EDC15C7 r/w via OBD2 Fiat Marea 1.9 JTD 2002god
12.) EDC17CP14 Audi A4 2.0 tdi 2009y (03L 906 019 AL, 03L 906 022 KC) r/w on the bench boot
13.) Sagem S3000 on the bench read Jtag renesans
14.) Astra G via obd read Delco 1.7 isuzu
15)This is a very nice version without all the hassle others typically have. Works fine with 0475 tool in Windows 7 x64.
16)Work very well Sp3 , I have Dell D530 Windovs XP 3 working O.K
So,if you are in the marketplace for a cheap costive ECU Programmer,then you can buy Fgtech 0475 Master Version ,it will be a great choice for you ,as you have seen,the features ,performance,functions and price are appealling and most important,this tool has been tested by many users,with many good feedbacks and the price is cheap affordable too.