How to Change M35XXX Mileage using Yanhua 35160 35080 Emulator

Yanhua Tech released a new 35160/35080 Programming Emulator to adjust mileage for following EEPROM models:
M35080/M35080-3/M35080-6/M35080V6/M35080VP/080DOWQ/080DOWT/160DOWQ/160DOWT/35160WT EEPROM.

 

Note: The simulator is stand-alone. No need to work with other software program or hardware.

yanhua-35080-simulator

Here’s the guide to change mileage on M35160 eeprom, same operation goes to M35xxx series.

Solder the 35XXX chip on the dash meter to the specificed location of the simulator
Pay attention to the chip location.

35160-simulator-1

35160-simulator-2

Connect the Yanhua emulator to the Mini USB cable and connect the usb cable with computer via USB port

35160-simulator-3

Create a new folder “mileage modification” on desktop

35160-simulator-4

Open M35xxx memory U disk

35160-simulator-5

Copy “M35xxx-Mileage modification tool” zip file and paste it to “mileage modification” folder on desktop

Then extract the file to current folder

35160-simulator-6

35160-simulator-7

Open “English” folder on U disk

Cut and paste “35160 original” file to “mileage modification” folder

35160-simulator-8

Then open with M35xxx-Mileage modification tool by simply dragging the file to it

35160-simulator-9

Then the prompt program will show the current odometer information,i.e  current mileage: 102385km

35160-simulator-10

Enter the mileage you desired (within one million) and add a unit km (kilometer) or mi (mile), i.e 1234mi

35160-simulator-11

There will be a new file “35160-1234mi” generated on “mileage modification” folder

35160-simulator-12

Delete the “35xxx simulated” file on U disk

35160-simulator-13

Cut and paste the new generated data file “35160-1234mi”  from “mileage modification” folder to U disk

35160-simulator-14

Replug the Yanhua 35160/35080 emulator 

35160-simulator-1535160-simulator-16

35160-simulator-17

Then open the M35xxx memory U disk again

The new data file “35160-1234mi” will be automatically renamed to “35160 simulated”

35160-simulator-18

Open “35160 simulated” file in U disk and open “35160-1234mi” mileage modification folder to make a data comparison

35160-simulator-19

35160-simulator-22

If the data is the same. The emulator operation is successfully completed. Mileage correction is done.

35160-simulator-20

Finally solder the simulator to the instrument.

 

www.obdii365.com

 

OBDII365