Micropod 2 with wiTech software is able to program a new key to Jeep Wrangler 2018.
Car: 2018 JEEP WRANGLER 3.5L V6 24V WT ENGINE UPG I W/ESS
Here you go….
In wiTech software interface,
Select RFH – Misc Functions – Program Ignition FOBIKs
Miropod2 starts to program ignition fobik(s)
Just do as what displayed in the interface
Turn ignition off
Enter the vehicle pin.
The pin can be found by authorized personnel on dealerconnect under Parts – Reference Library – Key Code, On this vehicle, the pin value expires after 12 hours and must be obtained new from dealerconnect every day it is needed
Verify the pin
Press and hold the stop/start button with the top of the fobik being programmed
Continue depressing the stop/start button until the successful message is received
Programming ignition fobik
Programming the ignition fobik successful
Continue to program another fobik or close
Press and hold the stop/start button with the top of the fobik being programmed
Continue depressing the stop/start button until the successful message is received
Reading updated key information
Programming the ignition fobik successful
Test the key and confirm its functionality
Read and clear DTCs
Done!
