Aprilia Mania 850 P0335 Fault Solved by J2534 Cable

Aprilia Mania 850 motorcycle P0335 Crankshaft Position Sensor Circuit Malfunction fault code solution by using cheap J2534 cable is provided here.

 

The frequently symptoms are indicator warning lights  go off  and won’t start during driving.  You proper need to carry out diagnosis.

aprilia-850-inpa-1

aprilia-850-inpa-2
a vehicle obd cable (VAG KKL OBD2 cable  16 pin to USB cable with the FTDI chip is mostly frequently used. But I use a Mini VCI J2534 cable which i bought to diagnose Toyota with Techstream software before)

aprilia-850-inpa-3

connect to PC

Download GuzziDiag software from internet.

aprilia-850-inpa-4
configure for communication

Set com port to COM 4 and select motorcycle type: Breva 850

aprilia-850-inpa-5

Magneti Manelli CDI

aprilia-850-inpa-6
Make a connection among mini vci cable, laptop and motor

aprilia-850-inpa-7

Guzzi Diag read Fault code value:

P0335: no signal

U1701:no signal

U1702: no signal
read and clear fault code

aprilia-850-inpa-8

check again from the instrument cluster

aprilia-850-inpa-9
Re-connect to check for a real faulty location Crankshaft position sensor called crank angle sensor faulty

aprilia-850-inpa-10

View service manual

aprilia-850-inpa-11
Location verification

aprilia-850-inpa-12

Lift the trunk out

aprilia-850-inpa-13
removing the connector

aprilia-850-inpa-14

it is a difficult to pull out

aprilia-850-inpa-15
separate

aprilia-850-inpa-16

comparison with normal

aprilia-850-inpa-17

normal

aprilia-850-inpa-18

death confimration

aprilia-850-inpa-19
Replace the gear with a new gear warning light is also used to replace both speed sensors

aprilia-850-inpa-20
Fixed obviously.

 

Disclaimer: The tutorial was provided by Korean expert #Dragon Motor. You are at your risk.

OBDII365