CGDI Prog MB Mercedes Benz Key Programmer: all key lost works

Collection of real CGDI Prog MB Mercedes Benz Programmer feedback including copy key with key and copy key without key (all key lost). Many thanks to the real users test and report.

Part 1. Add only key with the option “with key“.

->  W220 first test, Read Blank Key, Read Write Erase key OK, read EZS and Password from Key…works

 

-> Tested on W212
Read EZS —> OBD work Fine
Calulating PW from EZS —> Work fine Online Server
Key Calculating —> v041 & v051 Work fine online Server

-> Mercedes W212 2010 e250 Petrol Automatic works

 

->W203 2004 spare key making: 

Total time about 13 minute when begining to programming new key. Read pass NEC key by IR and calculate PSW

Key still working after get PSW.

Done in car.

 

-> Mercedes W221 2010 Facelift S600 V12 works

Click on “Benz monster” on the desktop.

mercedes-w221-2010-facelift-s600-v12-with-cgdi-mb-01

Click on “Load EIS data”

mercedes-w221-2010-facelift-s600-v12-with-cgdi-mb-02

Open the EIS data folder “w221 2010”, here you can see EZS data with generate PW and you can see key generate working!!!

mercedes-w221-2010-facelift-s600-v12-with-cgdi-mb-03

Write key 8 and car can start.

mercedes-w221-2010-facelift-s600-v12-with-cgdi-mb-04 mercedes-w221-2010-facelift-s600-v12-with-cgdi-mb-05

-> W207 on bench OK, 11 minutes

-> W203 2004 spare key making takes about 13 minute when begining to programming new key. Read pass NEC key by IR and calculate PSW

Key still working after get PSW.

Part 2. Program new key with the option “without key” when all key lost.

-> test all key lost on w164, need gateway.

 

-> Tested w212 ALL KEY LOST !!! In car, done by OBD
Work realy realy good!
Member say:
W212 is from 2012
Read ezs About 30mins
Upload data
Querry
Password given

 

Read eis info
Paste key password
Save
Then key calculation

Very nice CGDI MB tool 🙂

 

-> CGDI Prog work good to do W207 W204 lost keys on bench, use with VVDI cable report by:
Alessandro silva w204 all key lost ok 100 percent.

W204 get data: About hour
PSW W204: 11 minute all key lost in bench with VVDI cable
had VVDI MB and CGDI, CGDI is faster and no problem to get Password:

W204-207 PSW

W204-207 PSW VVDI

Test with my W209 545 31 08 on bench as add key: 15mn all done
Trying all key lost, failed. But a friend do with W209 545 05 08 success PSW by IR without gateway

cgdi-w209-1 cgdi-w209-2 cgdi-w209-3 cgdi-w209-4 cgdi-w209-5

Related Question: I don’t understand when we have CGDI tool working all by OBD why lads want the tool to work on the bench???

Answer: For example if car is some further from workshop and you must spent time driving to the car or customer is just TOO far to drive, so then he can sent EIS or drive by himself bringing EIS it with him at workshop. It’s time saver and what if tool will not work via OBD? You will loose many time driving ex. 30 miles x2. If you have on bench, you can work at your place without risk of wasting time. Also calculating psw at the place of car might last 30 minutes, 1 hour in all keys lost? It’s much time to sit in the car + you have to take care of battery charger. If you have on bench, you can drink a coffee or a beer if you want and enjoy the waiting time
Still no tool which can do all merc by OBD anyway…

 

-> W203 with W209 EZS all key lost, done in the car about 70mn: Successful.

 

-> Calculation PSW always the first time, never fail.

W203-EZS209

->Plug USB to computer, software recognise at once. So i take 2 used BE key put in and read. Software say need 12V.

So i plug 12V and read and reset to unused quickly. Will test on bench W209 as key lost later.

 

CGDI MB tested failure:

CGDI work not on all by OBD
W906 Sprinter don’t work (CGDI Supports W906 only CAN BUS not K-line)
W230 SL55 AMG 2006 don’t work (CGD Supports W230 CAN BUS, you can send EIS and CGDI to factory to add K-line)

 

Part 3: CGDI MB tokens

This device also work with tokens for password online calculation. what a nice is : free two tokens each day for 6 months.
Feedback: Yesterday test online calculation, very fast, less than minute. And the counter (10) decrease to 9.
Today it become 10 again. So I think for now until 6 months, I can calculate 10 time/day.

Part 4: seems this CGDI MB tool is vvdi clone, or no?

Users already confirm it is not VVDI clone, they open CGDI and say, PCB is complete other than from VVDI and MCU is other than from VVDI !!!

cgdi-prog-mb-key-programmer-pcb

cgdi-prog-mb-key-programmer-pcb-02

CGDI MB tool update:
After server updated, new software will realease within 2 days with:
[13:43, 7/11/2017] xxxxxx: will update as follows :Calculate erase password, enable password. Erase EIS, enable the password, write EIS data, calculate the current code hopping key track

Conclusion:

If you are hesitating for couple of weeks if it’s worth to but this tool, after plenty of positive opinions, will you decide to order CGDI Benz and will make a test as soon as you get it? I don’t intend to push other Member to Buy CGDI MB, but share what it works and not work.

 

Then, where to order one CGDI mb tool?

CGDI is a new tool, so no copy so far, there are not only one seller supply this tool, but I think I am happy with www.obdii365.com, the CGDI Benz key programmer is available here:

http://www.obdii365.com/wholesale/cgdi-prog-benz-key-programmer.html. good luck.

sales