KESS V2 V2.15 FW4.036 read BMW F25 SIEMENS MSV80

Here is the instruction on reading BMW X-series F25 SIEMENS MSV80 ECU with KESS V2 new updated version Ksuite V2.15 with firmware 4.036 ECU tuning kit master version.

Well install KESS V2 Ksuite V2.15 software
Open K-suite 2.15 software
Open K-suite 2.15 software Open K-suite 2.15 software
Select vehicle brand: BMW
Select X-series F25
Select ECU Type X3 xDrive 28i 3000 24V Petrol 2010 with ECU Type SIEMENS MSV80
KESS V2 V2.15 FW4.036 read BMW ECU
Select vehicle protocol: CAN
KESS V2 V2.15 FW4.036 read BMW ECU
Select ID
KESS V2 V2.15 FW4.036 read BMW ECU
Connect your vehicle to a stabilized battery charger in order to use this Serial Protocol
Switch on the dash-board, press connection
Switch off the dash-board to continue
Check vehicle information, HW, SW, Chassis
KESS V2 V2.15 FW4.036 read BMW ECU
Save vehicle information
KESS V2 V2.15 FW4.036 read BMW ECU
Switch off the dash-board
Select “READING”
KESS V2 V2.15 FW4.036 read BMW ECU
Switch on the dash-board
Switch off the dash-board
Then turn ignition switch to OFF
Click “Yes” to proceed to read
Reading ECU in process
KESS V2 V2.15 FW4.036 read BMW ECU
Save ECU data
KESS V2 V2.15 FW4.036 read BMW ECU
Turn ignition off
Reading ECU completed

Relate article: Free KESS V2 K-TAG K-suite ECU V1.89, V2.06, V2.08, V2.10 software
Kess V2 V3.009, V4.036 vs. KTAG V5.001, V6.070, V7.003

 

OBDII365