Godiag released a 9 in 1 gearbox adapter set. The adapter is compatible with multiple devices. Here we will show the connection diagrams.
The Godiag 9 in 1 gearbox adapter set has 9 different connectors for V30/ DQ200/ DL501/ VL300/ VL381/ DQ500/ DQ250/ DQ380/ DQ381/ DQ400E/ DL382 gearbox TCUs.
Compared with GODIAG 7 in 1 or other 7 in 1 Gearbox Cable, GODIAG Gearbox Cable 9-in-1 Set has the following new features:
There is a bonus OBD2 bench connection adapter (converter) in the package.
The bench converter has different connectors for Autel gbox, multi prog, OBD2 female interface, gearbox adapter etc.
Godiag 9 in 1 gearbox adapter connection diagram to Autel IM508/IM608 via Gbox. Connect Gbox direct to the Gbox connector of the bench converter. Then supply 12V power supply to the Gbox.
Godiag 9 in 1 gearbox adapter connection diagram to Xhorse Multi Prog. Connect multi prog direct to the multiprog connector of the bench converter. Then supply 12V power supply to the multi-prog.
Godiag 9 in 1 gearbox adapter connection diagram to Scanmatik 2 Pro + PCMFlash software. Connect SM2 pro direct to the OBD2 female connector of the converter. Then supply 12V power supply to the godiag gearbox converter. Then you can read these gearbox with SM2 pro on bench.
If you connect godiag 9 in 1 adapter with foxflash. Also connect foxflash via OBD2 female connector.
The godiag converter not only allows to connect SM2 Pro to gearbox, but also connects with ECUs through DIY shortcut connector, as the diagram below.
Godiag 9 in 1 gearbox adapter connection diagram to Flex programmer. Connect Flex to the DIY shortcut connector of the gearbox bench converter. Then supply 12V power supply to the Flex unit.
Keep updating…
