The Keydiy BDC2/BDC3 5C/5D solder-free interface board set (13 adapters) is also compatible with the KD-X6 tablet.
There are two ways to connect these interface boards with KD-X6 to read original key data.
Take the #1 BDC2/BDC3 interface board as an example.
#1 adapter works with both BDC2/BDC3. Check the BDC2 and BDC3 positions carefully.
The two pins on the left are for BDC3 and two pins on the right are for BDC2.
Set the jumper cap to BDC2/3.
Remove the original key shell.
Place the key circuit board onto the interface board and lock the PCB.
2 ways to connect these boards with KD-X6:
Way 1: via renew cable
Connect renew cable with KD-X6.
Then connect the other end to the white port of solder free interface board.
Way 2: direct connection
Directly connect the interface board to the KD-X6 tablet.
The first method is recommended because some interface boards have a wire leaded out. For example, with the No. 9 interface board, plugging it directly into the device is inconvenient for subsequent operations.
