How-to: read/write (clone) BSI PSA Valeo or Johnson Controls on table with Autel MaxiIM KM100/Autel IM508/IM608 (menu is the same) and the Godiag GT100 breakout box.
Need to find the wiring diagram by yourself.
For the pinout, you can see at the beginning of this video where it very well details the connection on the table.
Cloning BSI is high risk. Proceed with caution. You are at your own risk.
Here is the connection with godiag breakout box.
In Autel KM100, select IMMO->Citroen->Manual Selection->C3->2009-2016 blade key->Control Unit->Read Immobilizer password (BSI)
Press the emergency flasher indicator
Read PIN
Logging into system
Read EEPROM
Verify password
Go back to the Control Unit menu, select BSI clone
Make sure the BSI type, BSI number and BSI number2 is consistent before performing the function.
Need to give power supply during BSI cloning.
Press emergency flasher indicator
Check and confirm BSI information
Press Yes to clone BSI
Logging into system
Read and save EEPROM
Read and save Flash data
Then you have to rewrite the previously saved flash and eeprom on the replacement BSI and that’s it.
Read also:
