This car has a key but the remote stopped working when I inspected the remote. The back was so far damaged I couldn’t repair it.
hit the teamviewer id to allow access and now we have control
even though we have a key i want to see if it does all keys are lost.
we are going to do it as all keys lost
Go to IMMO function- Toyota
Auto scan VIN very fast
Decode VIN and check vehicle information, it is a Corolla 2020
Immo status scan
Autel KM100 says one DTC in the immobilizer
we go head and do the quick erase up on the top right there
You don’t have DTCs when you are programming key on this car.
Go into Immo Learning- Immobilizer – Immobilizer Reset (all keys lost)
The driver’s door is open
Copy and paste rolling code here
go ahead and hit OK
it’s gonna take 16 minutes to reset immobilizer so we’re going to hit ok turn it off, remove the key and turn it back on
it should do the 16 minute countdown
so pretty cool.
Turn ignition on with a master key
we input the password
switching off remove the key
Insert the smae key and leave ignition off
Leave the ignition off
cycle the key on and off eight times
car starts ok
this thing works for that
let’s go and do the remote side
hold Lock and unlock
let go and hit unlock
there you go
we’re clearing the remotes
and we’re programming the new one at the same time
That’s it pretty quick still 16 minutes plus remote program, nothing different
just for $500 you can do this car and a bunch more.