The new VNCI Ford VCM3 is different from other Ford VCIs (VXDIAG, VCM2 Clone, SVCI 2534, VNCI MF Ford etc). It supports 4 channel CAN BUS and work on new Ford pickup and EV vehicles.
Our customers are very happy with the tool. Even works on Ford F150 for programming that most VCM2 would not work on.
The tool does not come with the software.
Here you can download software and driver for free.
Download here
Ford IDS software driver for VNCI VCM 3
or download full package from vnciobd.com (Download area)
Software including
Ford IDS V130
IDS Loader
IDS patch
VNCI device driver
Ford VCI Driver
Operating system: Windows 10
Multi-language
How to Install Ford IDS V130 for VNCI VCM 3?
Download the VCM3 installation package, unzip it and put it on the desktop
1.Install jave.exe runtime environment
2. Install Ford VCI_software 1.0.1.18 driver
3. Install IDS-130.01_full.exe setup
Reboot after installing setup
4. Install VNCI device manager
If you have IDS license, install your license after finish 4 steps above.
If you do not have IDS license, you need to finish next two steps.
5. Install IDSFordLoaderDriverSetup.exe
6. Copy IDSLoader patch to
C:/Program Files(x86)/Rockway/IDSloader Ford/ directory
Create IDSloader patch shortcut to the desktop
Delete original IDS Loader for Ford shortcut on desktop
Connect VNCI VCM3 scanner with laptop
Run IDS from patch (06.IDSloader_patch.exe)
If VCI device manager show VCI update, ignore the update prompt.
VNCI Ford/Mazda is also compatible with original Ford FDRS and Mazda Mdars software for OEM online programming.
Download software on Ford/Mazda official
Read also:
