Volvo xc60 2015-2016 Denso MB279700 full system read, unlock, write working good using foxflash programmer.
D3 2l 4 cyl is Denso.
4cyl are often denso.
5cyl bosch most of time.
file is 3.9mb.
How to Read, Unlock and Write Volvo Denso MB279700 by Foxflash?
PROCEDURE:
1 –Read the Ecu AND unlock the Ecu2
2 – Write the ECU
Read and Unlock ECU
Connect the following pinout using the multifunction cable.
Start the driver: CAR > VOLVO > TOOLS VOLVO >UNLOCK DENSO MB279700 9641 SH72546R CAN
Click on the READ FILE button to read the file. After reading, click on the UNLOCK button to unlock and enable the writing of the control unit.
Write ECU
Now it will be possible to reconnect the control unit to the car and write the modified file via OBD.Use the following driver: CAR > VOLVO > [modello] >2.0 DENSO MB279700 9641 SH72546R CAN
Alternatively, you can WRITE also the ECU on the table using the pinout below.
Note: Compared to the read pinout, the CAN line is moved.
PINOUT FOR WRITING
