Here is the instruction to decode, read and change Ford TMS470 radio code using OBDSTAR MT200 radio code reader.
OBDSTAR MT200 is the latest handheld radio decoding tool developed which supports Ford, VW, Skoda radio types. All by OBD or BENCH, easy to operate.
Function:
Read EEPROM
Write EEPROM
Code Read
Code Change
Code Off
other functions.
MT200 Radio Coverage
Model example: Ford 6000 CD TMS470 radio
The radio brand and model can be determined by radio appearance and label
It is a Ford Visteon 6000 CD Single CD radio module.
Check wiring diagram in OBDSTAR APP
Run app, select Airbag/Dash/ECU/Radio->Radio Pinout (MT200)->Ford->Visteon 6000 CD
App also shows you the image of radio module.
Connect OBDSTAR MT200 reader with radio module
*For CANH & CANL, a 120 ohm resistor is required.
Connect MT200 to 12V power supply.
In MT200, select Function->Other Function->Radio Code V30.01->Ford->Visteoen 6000CD->TMS470->Bench
Read EEPROM 24C16 and save.
*If need to transfer eeprom dump from OBDSTAR MT200 device to PC, there is a USB cable in the package.
Select Code Read
Decode radio code successfully.
Verify radio code after reading.
Press Button 1 for the 1st digit of the pin code,
Button 2 for the 2nd and vice versa. Button 5 for confirmation.
The radio code is correct.
If need to change the radio code, select Code Change function
Input code you desired
Power off for 10s, then verify the pin radio code change was successful
Done.
