What’s the difference between Launch X431 IMMO Plus and X431 IMMO Elite?
Part I:
Launch X431 IMMO Plus vs IMMO Elite:
The biggest difference is IMMO Plus supports ECU Coding while IMMO Elite can’t.
IMMO Plus supports advanced system diagnostic while IMMO Elite supports basic system diagnostic, this will allow IMMO Plus supports more brands vehicles to do full system diagnostic, active test, module initialization and free resets.
For X-431 IMMO ELITE, it covers basic diagnostic functions, including read version information, read DTCs (Diagnostic Trouble Codes), clear DTCs and read data stream.
For X-431 IMMO PLUS, it covers full diagnostic function, including read version information, read DTCs (Diagnostic Trouble Codes), clear DTCs, read data stream, actuation test, matching, coding and programming etc
They have the same immobilizer coverage.
Part II:
Launch X431 IMMO PAD vs X431 IMMO Pro vs X431 IMMO Elite
| Item | Launch X431 IMMO PAD
|
Launch X431 IMMO Pro
|
Launch X431 IMMO Elite
|
| Screen | 10.1-inch | 8-inch | 8-inch |
| Operating system | Android 7.1 | Android 10.0 | Android 10.0 |
| Processor | octa-core 2.0GHz | Quad-core 2.0GHz | 2.0Ghz 4-core |
| Memory | 4GB | 4GB | 4GB |
| Storage | 64GB | 64GB | 64GB |
| resolution | 1920 x 1200 | 1280*800 | 1280*800 |
| Battery | 9360mAh | 47.88Wh (7.6V,6300mAh) | 47880mWh (7.6V, 6300mAh) |
| Camera | Front 8MP, Rear 13MP | Rear 8MP | rear 8 million pixels |
| Protection | IP65 | ||
| WIFI | 2.4GHz/5GHz | 2.4GHz/5GHz | 2.4GHz/5GHz |
| Protocol | CAN, CANFD, DoIP, J2534, D-PDU, RP1210 Protocol | CAN, CANFD, DoIP | CAN, CANFD, DoIP |
| Multi-language | Yes | Yes | Yes, 24 |
| X-prog3 | Yes | Yes | Yes |
| Smart Link C VCI | Yes | ||
| DBScar VII VCI | Yes | Yes | |
| Full system diagnostic | Yes | Yes | Basic diagnostic |
| ECU/TCM Clone | Yes with X-prog3 | ||
| ECU Coding | Yes | Yes | No |
| ECU Programming | Yes | No | No |
| Special functions | Yes, 39+ | Yes, 39+ | Yes, 39+ |
| AUTO VIN SCAN | Yes | Yes | Yes |
| Bi-Directional Control+ Active Test
|
Yes | Yes | Yes |
| AUTOAUTH FCA SGW | Yes | Yes | Yes |
| Optional TPMS function | with X-431 TSGUN | with X-431 TSGUN | with X-431 TSGUN |
| Optional ADAS calibration | with the X-431 ADAS calibration tools | ||
| Optional Battery Tester | With BST360 | With BST360 | With BST360 |
| S2-2 Sensor Box | Yes, with S2-2 Sensor Box | Yes | Yes |
| Oscilloscope | 02-2 Scopebox | Yes | |
| Videoscope | With VSP-600 | With VSP-600 | With VSP-600 |
| WiFi printer | Yes | Yes | Yes |
| Pre scan & post scan | Yes | Yes | |
| VAG Guided Function | Yes | Yes | Yes |
| Update | 2 Years | 2 Years | 2 Years |
| Smartlink remote service | Yes | ||
| Remote Diagnosis | Yes | Yes | Yes |
In Sum:
LAUNCH’s brand-new X-431 IMMO products provide an one-stop solution for vehicle diagnostic and anti-theft matching. It not only provides advanced diagnostic functions, but also key matching, password reading and immobilizer replacement functions for locksmiths, which covers main European, American and Asian makes, such as Mercedes-Benz, BMW, VW/Audi, Porsche, Peugeot Citroen, Ford, GM, Honda, Toyota, Hyundai, Kia, etc. Meanwhile, it supports 170+ Bosch’s, 10+ Siemens’s engine ECU and 18+ gearbox ECU BENCH mode clone. Pre-scan and post-scan report of diagnostic function helps locksmiths and workshop to show comparison of vehicle health status to customer clearly.
They are slightly different from each other.
IMMO PAD has smart link VCI supports online programming and J2534 passthru programming, immo pro/plus and immo elite do not.
IMMO PAD is compatible with ADAS add-on. IMMO PAD has more protocols than the other two.
IMMO Pro (or Immo Plus) and IMMO Elite are similar, IMMO Elite does not do ecu coding nor programming.
Read also
