How to Adapt VAG ECU to Micronas / NEC cluster via Xhorse VVDI2?

Problem: I have Xhorse VVDI2 programmer, I want to adapt PCR 2.1 and I get “security access failed. operation not completed.”

 

Solution: this is how to adapt PCR and similar

 

  1. How to adapt ECU to Micronas / NEC cluster via Xhorse VVDI2.

Vvdi2 Vag Ecu Adaptation To Cluster 01

 

  1. Read cluster IMMO data and copy to TXT file

Vvdi2 Vag Ecu Adaptation To Cluster 02

 

  1. Read IMMO data from ECU and paste to TXT file.

Vvdi2 Vag Ecu Adaptation To Cluster 03

 

  1. Go to adapt unit module

Vvdi2 Vag Ecu Adaptation To Cluster 04

  1. Select: ECU EDC16/17

Type manually CS and PIN data and Read.

and wait till data read.

Vvdi2 Vag Ecu Adaptation To Cluster 05

 

Save power class

Vvdi2 Vag Ecu Adaptation To Cluster 06

 

Paste VIN, CS, PIN, you read from cluster and click “Write”, confirm yes.

Completed.

Vvdi2 Vag Ecu Adaptation To Cluster 07

Vvdi2 Vag Ecu Adaptation To Cluster 08

To finish – go to cluster and change manually power class and write immo.

Vvdi2 Vag Ecu Adaptation To Cluster 09

 

Enjoy!

 

www.obdii365.com

sales