Autel IM508 XP400 Renew Mercedes W203 ECU CR3.xx

Autel MaxiIM IM508 (with XP400) and IM608 is capable of renewing Mercedes ECU/ISM CR3.xx, CR4.xx CR5.xx, CR6.xx, CR60.xx, CRD.11, CRD2.xx, ME9.7, MED17.7.x, SIM4LE, SIM4LKE, SIM266 etc. This function can be completed only on bench. Some ECUs can be done with or without GBox, some do require the Gbox.

 

Here is the demo guide on renewing W203 ECU CR3.44 by im508 + xp400 pro.

Autel Im608 Renew Ecu Cr3 1

Connect xp400 wires with ECU according to the wiring diagram

Autel Im608 Renew Ecu Cr3 2

Autel Im608 Renew Ecu Cr3 3

Autel Im608 Renew Ecu Cr3 4
In IM508 you select CR3.xx->On bench (or On bench G-box if you use G-box)-> Read engine ECU information

Autel Im608 Renew Ecu Cr3 5

Autel Im608 Renew Ecu Cr3 6

Autel Im608 Renew Ecu Cr3 7

Establishing vehicle communication

Autel Im608 Renew Ecu Cr3 8
Read ecu information

Autel Im608 Renew Ecu Cr3 9
Press OK to save ECU info, always backup ECU data before operation.

Autel Im608 Renew Ecu Cr3 10
Select Renew engine (ECU)

Autel Im608 Renew Ecu Cr3 11
Autel im508 will ask you if Gbox is used. Here we don’t use Gbox, press NO and continue

Autel Im608 Renew Ecu Cr3 12
Enter 16-digit special key password. If you read the key pass before, im508 will auto fill it.

Autel Im608 Renew Ecu Cr3 13
Press OK to obtain erase password

Autel Im608 Renew Ecu Cr3 14
Network connection is required to calculate password for renewing engine ECU
Establishing vehicle communication

Autel Im608 Renew Ecu Cr3 15
Renew ecu is completed
Read ECU information again

Autel Im608 Renew Ecu Cr3 16
CR3.44 ECU has been renewed successfully

Autel Im608 Renew Ecu Cr3 17
Save new ECU data.

 

 

Read also:

VVDI MB BGA Tool Renew Mercedes 7G Tronic Gearbox

Renew BMW FEM/BDC ECU with Auro IM600/Autel IM608

CGDI Prog MB Renew Benz W221 DSM on Bench

OBDII365