Autel IM608 BMW Car List, IMMO and Diagnosis Test Report

Autel MaxiIM IM608 is a very good tool to cover bunch of different brands incl. “high end” Benz, Bmw, VW, etc.. Also you have additional diagnostic side for modules coding, programming or cloning if possible.

 

Part I: BMW immo car list

First of all, check IM608 BMW IMMO function list attached below:

 

Help :

  • All support OBD method
  • Part of the models support OBD method
  • All support on-bench/boot method
  • □Part of the models support on-bench/boot method
  • Not Required/Not Supported

 

 

Yesterday, obdii365.com engineers made 3 BMW videos of  IM608, one is to use IM608 & XP400 to read BMW key info and frequency; another is to use IM608 & MaxiFlash JVCI J2534 to diagnose BMW; and one to use Autel IM608 & XP400 to read / write EEPROM.

 

 Use Autel IM608 & XP400 to read BMW Hitag Pro 49 key info and frequency

00:06-00:11: Use USB cable to connect XP400 to Autel IM608.

 

00:13 -00:46: Tap “Programmer -> “Version Information” -> “Key” -> “Key read & write” -> Insert a BMW key into the hole of XP400 -> Automatic selection.

 

00:48 – 00:54: tap “Key ID”.

 

00:56: Tap “Read key information”.

 

01:22 -01:40: Tap “Remote detection” -> “Frequency detection”.

 

 

Use Autel MaxiIM IM608 & MaxiFlash JVCI to diagnose BMW X1 F49 2017


 

00:00 -00:23: Use OBDII cable to connect MaxiFlash JVCI J2534 Reprogrammer to the BMW OBD2 port. Wait until the Power indicator lights up green.

 

00:23 -00:26: The Communication indicator lights up blue (which means J2534 box is connected with IM608 successfully.

 

00:27 – 00:30: Tap “Diagnostics”, search “BMW” -> Accept.

 

00:35- 00:48: Tap “Automatic Selection”.

 

00:49 -01:11 : Confirm vehicle information.

 

01:12 -01:16 : The car indicator of J2534 box turn green (when communicating with the car) and turn off (after reading the car successfully).

 

01:19 -01:42 : Tap “Diagnostic” -> Auto Scan -> DME,ABS… ->

 

01:42 – 02:39: Tap “BDC” -> Read codes ->

 

 

Use Autel IM608 & XP400 to read / write EEPROM


 

00:00 -00:02: Use Autel IM608 & XP400 to read / write EEPROM.

 

00:06 -00:14: Insert the EEPROM adapter into the XP400.

 

00:14 – 00:28: Tap “Programmer” -> Chip (EEPROM, MCU, ECU) – > Chip read & write -> EEPROM -> ATMEL -> AT93C46 -> EEPROM.

 

00:29 – 00:40: Tap “Read” -> Save.

 

00:41 – 00:51: Tap “Write”, it will be soon written successfully.

 

Alright, thank you for reading! Hope the above 4 videos help you fully understand what Autel IM608 can work, when or how to use it with XP400 or MaxiFlash JVCI J2534 Reprogrammer.

Here is the collection of Autel IM608 BMW key programming test reports.

BMW Mini Cooper 2001 EWS enable/disable key with working key with IM608

BMW 525i 2007 CAS2 key programming via OBD with IM608

BMW 530i 2007 CAS2 key programming via OBD with IM608

BMW Mini Cooper 2007 CAS3/CAS3+ key programming

BMW 320i 2008 CAS3/CAS3+ key programming by IM608

BMW 120i 2010 CAS3/CAS3+ add key via OBD with IM608

BMW 2014 6 Series CAS4/CAS4+ key programming with IM608

BMW F10 CAS4/CAS4+ key programming with IM608

BMW Cas4/CAS4+ add key via OBD

BMW Cas4/CAS4+ add key on bench 5min

BMW Cas4/CAS4+ add key via OBD with IM608

BMW 528i 2013 F10 CAS4/CAS4+ add key via OBD with IM608

BMW X3 2013 CAS4/CAS4+ 5M48H with IM608 (with jumper wire)

BMW FEM EEPROM read from the IM608 (with APA103 chip reader)

FEM BMW X5 2013 FEM/BDC key programming with IM608

BMW F30 FEM/BDC module key programming with IM608

BMW I8 2016 FEM/BDC all key lost with IM608 (with G-BOX2)

BMW used DME engine replacement and programming ISN with IM608 and VVDI

BMW N20 MEVD17.2.9 DME ISN reading with G-BOX2 & IM608

BMW I Chassis TC1793 MEVD17.2.3 ISN reading with G-BOX2

IM608 BWM FEM/BDC 93C46 EEPROM chip read

BMW series F 2013 FEM key programming with IM608 (Portuguese)

BMW mini Reset Electric Steering Column Lock (ESL) by IM608

BMW used CAS module replacement MSD80 ISN read/write to CAS by IM608

BMW special feature coding with IM608

BMW DDE syncing with IM608

 

sales