SVCI ING Program Nissan 310F6-1VA5A TCM in Less than 4 Mins

The SVCI ING Nissan J2534 diagnostic tool can be used to program both new (blank) and used ECM, TCM etc control units after replacement.  Here’s the guide demonstrating a black TCM programming online in less than 4 minutes.

 

 

Nissan TCM  (Automatic Transmission Control Module) example:

310F6-1VA5A BEA01-120NA1 3603

Svci Ing Nissan Tcm Programming 0

 

Preparation:

Download, install, register Baochi Cloud diagnostic software and bind device to laptop

check SVCI ING Nissan user manual 

 

 

Nissan TCM Programming Procedure:

Connect TCM module with SVCI ING J2534 interface and 12v power adapter

Svci Ing Nissan Tcm Programming 1

Check the svci communication indicators’ status, the left indicator turns on and the right indicator flashes

Svci Ing Nissan Tcm Programming 2

Insert the SVCI ING Bluetooth dongle to laptop

Svci Ing Nissan Tcm Programming 3

Add a Bluetooth device

Svci Ing Nissan Tcm Programming 4

Search the SVCIBT-NS******** (with your serial number) device and pair

Svci Ing Nissan Tcm Programming 5

Open Baochi Cloud Diagnostic software on desktop and login

(click to enlarge following images if cannot see clearly)

Svci Ing Nissan Tcm Programming 18

Select Special Functions-> Re/Programming->Nissan/Infiniti/Datsun/GTR-> Replacement/Blank->TCM

Svci Ing Nissan Tcm Programming 6

Svci Ing Nissan Tcm Programming 7

Svci Ing Nissan Tcm Programming 8

Svci Ing Nissan Tcm Programming 9

Select operation mode: Default mode is recommended

Svci Ing Nissan Tcm Programming 10

select proper file, press OK to continue

Svci Ing Nissan Tcm Programming 11

Turn off ignition and replace TCM, then turn ignition to ON position

Svci Ing Nissan Tcm Programming 12

Loading data

Svci Ing Nissan Tcm Programming 13

Prepare for programming. Make sure keep battery voltage above 12V

Svci Ing Nissan Tcm Programming 14

Transferring data to SVCI ING Nissan

Svci Ing Nissan Tcm Programming 15

Programming in process. Don’t interrupt SVCI connection.

Svci Ing Nissan Tcm Programming 16

Wait until programming completed. Turn ignition OFF/ON several times.

Click OK and clear stored DTCs.

Svci Ing Nissan Tcm Programming 17

The TCM programming process takes 3 minutes and 49 seconds which is very fast.

 

 

sales