Ford UCDS Pro+ odometer correction help file:
Focus III
note: ignition should be switched to 2
go to IPC function
read mileage
reset mileage
enter a number as the new mileage
set a new mileage
note: only 2 steps for new Focus with a comfortable dashboard (marked in yellow)
upgrade ambient level 1 IPC to trend level 1 IPC
program euro eeprom configuration
attention: 1 credit will be removed for this operation
Mondeo/S-Max/Galaxy, Transit
reset mileage
enter a number as the new mileage
set a new mileage
attention: 1 credit will be removed for this operation
Modeo 5, Mondeo after year 2013
note: ignition should be switched to 2
go to special procedures IPC
read mileage
read mileage IPC high level
read mileage IPC low level
reset mileage
reset mileage IPC high level
read mileage IPC middle level – 4’’ LED screen
attention: 3 credits will be removed for this operation
enter a number as the new mileage
set mileage:
set mileage IPC high level
set mileage IPC low level
Kuga
note: ignition should be switched to 2
select HEC – Spec Function
go to the tab and then click to continue
attention: 1 credit will be removed for this operation
then mileage will be reset
then go to this interface for km change
enter a new km and then click to continue
Kuga 2
go to IPC function
read mileage
reset mileage:
reset mileage on level 1 IPC (small TFT)
reset mileage on level 3 IPC (BIG 4’’ colorful TFT)
click on Yes to reset
enter a number as the new mileage
set a new mileage
Note: credits for km change is free
you will have 35 credits inside your UCDS software when you buy UCDS PRO+ cable
when credits use up, pls send back your cable and engineer @OBDII365.COM will flash your machine
then you will have another 35 credits for use.
