How to Add VW Touareg PCF7945 Dealer Key with FVDI Clone

Here’s the guide on how to add touareg dealer key using fvdi abrites commander clone.

 

Connect FVDI with vehicle

Open software

Select Special Function->Key Learning->Standard Mode

fvdi-vw-touareg-dealer-key-1

fvdi-vw-touareg-dealer-key-2
FVDI detects car type
fvdi-vw-touareg-dealer-key-3

You can search login code from ECU of the vehicle by OBDII or from dump of the KESSY using Dump Tool from the special functions.

Other way is to extract security code by OBDII when read EEPROM of engine control unit-use  special functions “Engine Control Unit” main panel.

For this vehicle “Procedure 7” or “Procedure 8” is used depending of the production year.

Select Program dealer key

fvdi-vw-touareg-dealer-key-4

Select Autodetect from ECU

FVDI 2018 reads all 7 bytes of the component security bytes

fvdi-vw-touareg-dealer-key-5
Press Program

fvdi-vw-touareg-dealer-key-6

Put key/transponder in programmer and press OK

fvdi-vw-touareg-dealer-key-7
FVDI identified transponder type: PCF7945

fvdi-vw-touareg-dealer-key-8
Programming done.
Autodetected login code is “5245”

fvdi-vw-touareg-dealer-key-9
Enter new key number to be programmed
Press Learn button
Ignition OFF for 5 sec and ON again before continue

fvdi-vw-touareg-dealer-key-10
Switch OFF ignition and remove key then insert again the key and switch on the ignition

fvdi-vw-touareg-dealer-key-11
Turn OFF the ignition and insert every key which should be learned and give him on  position CRANK until steering lock become locked.

fvdi-vw-touareg-dealer-key-12
FVDI program Touareg dealer key success

 

 

http://www.obdii365.com

sales