How to install Ad-blue emulator to MAN trucks

Ad-Blue Emulator 7-n-1 Module is designed to disable Adblue system used in trucks, buses and other heavy vehicles with EURO 4/5 exhaust emission rates made by Mercedes-Benz, MAN, Scania, Iveco, DAF, Volvo and Renault.

adblue-emulator

Here is the instruction/illustration on how to mount Ad-blue emulator 7-in-1 on MAN truck.
Installation device Ad-blue emulator module to MAN trademark trucks:

adblue-emulator-on-man-1 adblue-emulator-on-man-2 adblue-emulator-on-man-3 adblue-emulator-on-man-4 adblue-emulator-on-man-5

1. Take away safety locks numbers (894,737,738)

2. Under a switchbox and at the left side(the party of the driver)
also find the socket (see a photo of Man_1,Man_2)

adblue-emulator-on-man-1

adblue-emulator-on-man-3

3 On the socket two brown thick wires are a minus. (see Man-3 photo)
4 Directly under them vertically are 191 wire-CAN H,192 wire-CAN L

adblue-emulator-on-man-4

5. From any socket at right direction take wire 15006, it’s plus

adblue-emulator-on-man-5

6 If at the time of shutdown there were mistakes-probably, after emulator installation the pictograph of toxicity of an exhausts won’t go out on a meter panel. In this case it is necessary to erase mistake and to nullify the MIL parameter in the EDC tab. In that case you not be able to do without MAN CATS.

 

How to mount Adblue Emulator 7-in-1 on MAN truck

sales