How to Install Original Truck Adblue Emulator 8-in-1 with Nox Sensor

The original Truck Adblue Emulator 8-in-1 with programming Adapter is designed to disable Adblue system used in trucks, buses and other heavy vehicles with EURO 4 and 5 exhaust emission rates made by Mercedes, MAN, Scania, Iveco, DAF, Volvo, Renault and Ford.



Original Truck AdBlue Emulator Box bypasses good working electronic module of the Adblue system on vehicle. Its very easy to fit AdBlue Emulator Box to any truck or bus equipped with AdBlue systemand it will override AdBlue system instantly, it will stop the usage of AdBlue liquid. AdBlue Emulator Box disables AdBlue system electronics gently so there will be no power loss of the engine or any warnings on the dashboard and in diagnostic system.




Vehicle List: Mercedes, MAN, Scania, Iveco, DAF, Volvo, Renault and Ford
Support Trucks, Buses and Other Heavy Vehicles with EURO 4 and 5 Exhaust Emission Rates 


Easy to start using

Firstly, you have to connect the emulator to PC via USB and start the software to choose the brand of your vehicle. The device will be programmed in seconds. That’s all, you may connect it to the vehicle.

If you change your vehicle to another one, you have to repeat the procedure and adapt the device to a brand of a new vehicle via the software before installing the device into the truck.


The AdBlue Emulator v.3 works with fault SCR system

You may connect the emulator to a vehicle with errors in SCR system. It is a huge advantage of our device. You do not need to use any additional hardware like any dealer’s auto scanner to fix the errors. Infact the whole AdBlue system could be removed from the truck.

How to install original Truck Adblue Emulator 8-in-1?

check the picture guides step-by-step










There are some cheaper adblue emulators options available in

Cheaper Truck Adblueobd2 Emulator 8-in-1 

Truck adblue emulator 7-in-1

New adblue emulator 9-in-1 support Cummins