Obdii365.com is rolling out the VAS 5054A replacement—VAG PRO VCP 5.5.1 diagnostic, coding and programming tool – run much faster and better than ODIS 3.0.3.
Computer requirement:
Windows XP or Windows 7
Processor: 700 Mhz or faster,
256Mb RAM,
1 USB ports available.
Language: English, Czech, Danish, German, Hrvatski, Italian, Dutch, Polish, Russian, Spanish
Compatible device: VAG VCP interface
Top reasons for VAG CAN-PRO:
1. better and faster than VAS 5054A ODIS 3.0.3
2. supports diagnosis, offline coding and programming
3. No engineer codes required for coding or programming
4. Supports CAN BUS, UDS, K-line
How to install VAG PRO VPC v5.5.1 on WinXP and Win7?
run and install WinRAR 5.31 in Computer/DVD Drive (E:) VCP6
unzip vcp6.rar
copy Driver VCP folder to Desktop
!! DIFFERENCE:
For Windows XP users, please go to Computer management to select USB human interface device.
For Windows 7 users, select USB input device in Computer management, when USB input device installed (pop-up window)
device driver software was not successfully installed (pop-up window)
then select VCP for Update driver software
browse: Desktop/ Driver VCP
device driver software was not successfully installed (pop-up window)
then select USB serial port for Update driver software
browse: Desktop/ Driver VCP
successfully updated driver software
select USB serial port (COM4) and USB serial converter
then run vag can pro application on Desktop
VCP 5.5.1 supports CAN, K-Line, CAN->K-Line, K-Line->CAN
change the software language in setting options
VCP 5.5.1 supports ECUs: engine, gearbox, abs,a/c, airbag, instruments awd, immo, navi, steering assist, centr. conv. radio, and more
go to Engine, then connect
then go to additional function: guided function
Video Guide:
How to install VAG Pro V5.5.1 on Windows XP?
How to install VAG Pro v5.51 on Windows 7?