There is no related document or video guide on V4.3 Serial suite Piasini master version installation, so how to install the software and use the ecu tuning kit?
Serial Suite Piasini engineering is a device that allows reading and writing memory MCU contained in the ECU of engine and transmission, Suite Serial read always the complete content of the file of the ECU to be able to easily return to the stock setting.
Old version V4.1 Serial suite Piasini master requires to provide the HW (hardware) ID to the dealer and activate the software with license key, but the V4.3 does not.
How to use V4.3 Piasini software?
1) No need to install software, no need to activate (no need activation license key)
2) Copy the software to laptop, insert the USB key/dongle via USB port
3) Directly open the software
4) Select car/motorcycle makes, version, ECU type and then read/write ECU.
Software display:
Serial suite Piasini Engineering V4.3 Master Version Features:
Firmware version: V4.3
Language: English
Operating system: Win XP only
JTAG – BDM – K-line – L-line – RS232 – CAN-Bus
Read/Write Programmer
Checksum Correction Incorporated for Mitsubishi/Denso/Hitachi
Server On-line Updates and Security Survey
New ECU Implementation Free of Charge
V4.3 piasini contains all features of V4.1, but if you need piasini serial suite v4.1 keygen, here is free link:
http://down.obdii365.com/pisini-v4.1.zip
Serial suite Piasini Engineering ECU programmer wire diagrams:
Car& Motorbike list:
Serial suite Piasini Engineering V4.3 Master Car List:
Denso-Mitsubishi
Denso-Nissan
Denso-Suzuki
Denso-Jaguar
Hitachi-Nissan
Keihi-Honda
EFI-Lotus
EFI-Lamborghini
Serial suite Piasini Engineering V4.3 Master Motorcycles List:
Denso-Suzuki
Denso-kawasaki
Mitsubishi-Yamaha
Keihi-Honda
Simens-Renault
Denso-Subaru
Mitsubishi
Mitsubishi-Mazda
Denso-Volvo
Denso-Mazda
Denso-Reanault
Transtron
Denso-Opel
Mitsubishi-Opel
Toolbox Serial
Toolbox C16x
Customer review:
Piasini serial suite 4.3 actually it supports not only some bosch denso in Toyota but also petrol denso for Subaru etc are supported.
FAQ:
Q: When I trying to read next RX-8 via OBD my piasini interface, the software displays an error reading “License on system corrupted, go in recovery mode.”
A: You can just re-install software and disable internet connection, everything will be fine.
