As titled, Can we dial with Chrysler (Dodge Jeep) 2020 2021 models with the Microod2 China clone wiTECH 1.0 (17.04.27)? Here are some clues. 2018 + FCA cars have new ecu SGW which need to be unlocked online WITECH… Continue Reading
SUBJECT: Replacing or reprogramming the Front Control Module (FCM) OVERVIEW: Erroneous Actuation of Horns, Headlamps, and Parking Lamps while vehicle is parked MODELS: 2001 – 2004 (RG) Chrysler Voyager (International Markets) 2001 – 2004 (RS) Town & Country/Caravan/Voyager SYMPTOM/CONDITION:… Continue Reading
All you need to do is program old fob (RKE) to the replacement CTM using DRB-III after get a CTM replaced. This is confirmed using an official DRB-III emulator and WiTech VCI pod. Programming the RKE (Remote Keyless Entry) transmitter… Continue Reading
Question: which diagnostic software for Chrysler Grand Voyager 2006 2.8 CRD? Tested: It looks like the 2006 voyager is covered by the DRB III. You can download a copy of witech with the DRB III emulator built in. You… Continue Reading
SYMPTOM/CONDITION: The heated steering wheel shuts off to soon, usually after 30 seconds and does not achieve satisfactory temperature. This is an intermittent condition and more noticeable at temps below 19.5°C (67.1°F). MODELS: 2015 (WK) Jeep Grand Cherokee 2015 (W3) Jeep Grand… Continue Reading
What is Chrysler factory DRLs (Daytime Running Lights)? Daytime Running Lights (DRL) are a safety feature that makes your van more noticeable to approaching traffic and could save your life and the lives of your passengers one day. How to… Continue Reading
This is about flashing an ECU using Enhanced DRB III Emulator Disclaimer: obdii365.com cannot provide TechTOOLS for you guys. Just share the way with you all Pls search TechTOOLS on Google. Open TechTOOLS Search by VIN or YME Select… Continue Reading
Topic: Can you use AppCar FCA software with Mircropod 2? What is Appcar DiagFCA: Appcar DiagFCA is a professional diagnostics & programming software for Chrysler, Dodge, Jeep and RAM vehicles The Appcar DiagFCA software allows you: Read and erase all DTC Fault… Continue Reading
This is a research result about “OBD 2 Chrysler Factory Scan Tools ” from a fellow professional and what he shared with all on the web. Thanks to Brin who has taken the time to do this. Here are several… Continue Reading
Look here: Procedure in detail will be of interest to those contempating a PCM change After reading this, it is obvious that PCMs can be reprogrammed. I have flash DVD for the DRB III, hopefully I will get it and… Continue Reading
Discussion: DRB3 compatibility with MicroPOD II and VCI Pod. Car: 2004 Chrysler 300M Software: DRB3 Firmware: wiTech MicroPOD 2 and VCI Pod Disclaimer: The document here is for sharing purpose. Check original resource here. It is… Continue Reading
When exploring wiTECH v17.04.27 flash files located in DCC Tools folder, you can see 9 files: StarMOBILE vas-ppc-4.3.38.zip sm-flash.zip pe_stm.full.1.22.0.stm VCI Pod vas-armwipod-4.3.40.zip wi-flash.zip vservera.upgrade-mpvci-4.6.1.zip MicroPod II vas-armmicropodii-4.3.40.zip upgrade-wmp-9.13.0.zip mx.upgrade.2.4.1.zip When you connect the tool… Continue Reading
Look here: clone Micropod 2 test reports Software to test with: wiTech and DRB3 software Cars to test: 1997-2018 Chrysler, Dodge, Jeep, Fiat Functions to test: basic diagnostics, key programming, reflash programming, module flashing, ABS bleeding Test reports… Continue Reading
Received wiTech VCI Pod and the clone this week, and tested this Saturday. Now, I’d like to share something about it with you all. Disclaimer: The document here is for sharing purpose. Check original resource here. 1. Order and shipping I purchased the wiTech VCI Pod… Continue Reading
