As titled, can we use the PCMtuner smart usb dongle with original tatrix openport 2.0? Yes, the usb dongle can be used with any j2534 openport interfaces. The dongle is working with the original openport without issue. The dongle… Continue Reading
The Tactrix OpenPort 2.0 has been confirmed working with xentry passthru version. What capabilities and limitations are with running Xentry on the Openport 2.0 interface? Obdii365.com will discuss this topic. Pros: This combination is useful for ECUs with CAN capability. … Continue Reading
In the previous post, we discussed how to choose a high-quality Tactrix Openport 2.0 Clone. Today we share another guide for correct resistors in order to make it work with the network connection. The HQ openport 2.0 clone does not… Continue Reading
In this article, we will explain how to get the right clone Tactrix Openport 2.0 J2534 adapter and why Openport 2.0 is better than Mini VCI J2534 interface. Openport 2.0, like its colleagues MVCI 3 in 1 and Mini-VCI,… Continue Reading
Question: May i have a question if somebody test already tactrix Openport 2.0 J2534 interface to make it works with BMW ISTA/D (ISTA+)? Solution: Confirm it its works with ISTA/D, install bmw passthru drivers and set ediabas.ini… Continue Reading
MultiFlasher is a chip-tuning software intended for reading/writing FLASH and EEPROM memory of ECUs. It can use any adapter supporting J2534 standard, e.g. OpenPort 2.0 by Tactrix. Before flashing and after reading the program checks the firmware and checksums, and corrects them if needed. It allows… Continue Reading
Tools you will need: Tactrix OpenPort 2.0 Ecuflash Software 32BITBASE Ecuflash Definition files for your ROM type Tactrix OpenPort 2.0 is a hardware that connects Subaru and Mitsubishi vehicles with a PC. EcuFlash is the software that reflashes ROM… Continue Reading
