AutoTuner Update Ford MD1CP006 MG1CS036 MD1CS005 ECUs via OBD

AutoTuner released a new OBD protocol on Aug. 22nd, 2025.

AT development team never rests: the OBD protocol for Bosch MD1CP006 and MG1CS036 ECUs found in Ford vehicles all years is now available.

This one is for our friends across the Atlantic, where horsepower is a way of life and muscle cars still set the tone.

Key Features:
Type: Engine Control Unit (ECU).
Readout: OBD NR.
MCUs: TC298, TC399.
Read time: 5min 30sec.
Write time: 6min 30sec.
Checksums correction.

Compatibility List*

FORD: 6.7 Powerstroke / 2.0 Ecoboost / 2.3 Ecoboost / 2.7L Ecoboost V6 / 3.0 V6 Ecoboost / 3.5L Ecoboost (Raptor) / 3.5L Ecoboost V6 / 3.5L Powerboost MHEV / 5.0 Ti-VCT V8

*The list of vehicles may evolve over time.

Aug 23rd, 2025.

Autotuner development team keeps up the momentum and moves forward with a new release dedicated to Ford. This release gives access to the latest Bosch MD1CS005 ECUs, for which the BENCH method was previously blocked. From now on, normal reading and writing (NR) are possible directly via OBD.

This release specifically targets the European market, as this ECU powers the 1.5 EcoBlue / TDCI engines.

Key Features:

Type: Engine Control Unit (ECU).

Readout: OBD NR.

MCU: TC298.

Read time: 5min 30sec.

Write time: 6min 30sec.

Checksums correction.

Supports till year 2025.

Compatibility List*

FORD: 1.5 Ecoblue / 1.5 TDCI EU6

Aug. 28th, 2025.

Today, it is the Bosch MD1CP061 ECU stepping in, via OBD, exclusively with your trusty AT Tool.
The normal read (NR) gives access to the software blocks and calibration blocks, ready for your tuning work.

A fresh compatibility for Ford and Volkswagen designed to keep control over the latest releases. As always, smooth, fast, and smelling like a job well done.

Key Features:
Type: Engine Control Unit (ECU).
Mode: OBD NR.
Readout: Software + Calibration.
MCU: TC298.
Read time: 8min.
Write time: 4min 30sec.
Checksum correction.

Compatibility List*

FORD: 3.0 V6

VOLKSWAGEN: 3.0 TDI V6 / 3.0 V6

Aug. 29th, 2025

NEW AutoTuner RELEASE
Ford again? You bet, but not just any model ! This time, it is the Bosch MG1CS055 ECU that joins the list of OBD-compatible units with your AT Tool.
A release that should once again delight our American users, especially those who have been waiting to work on the latest Ford F150 model.
Yet another sign that our team has clearly forgotten where the brake pedal is.

Key Features:
Type: Engine Control Unit (ECU).
Mode: OBD NR.
Readout: Software + Calibration.
MCU: TC389.
Read time: 6min 30sec.
Write time: 3min 30sec.
Checksums correction.

Compatibility List:
Model: F150 2023+
Engines: 2.7L EcoBoost V6 / 3.5L EcoBoost V6 / 3.5L EcoBoost V6 (Raptor) / 3.5L PowerBoost MHEV / 5.0L V8 / 5.2L V8 SuperCharged

Sep. 1st, 2025

NEW AUTOTUNER RELEASE
Kicking off the week full throttle with the MG1CS060.
This Bosch ECU is now fully supported in OBD mode with your AT Tool.
A fresh compatibility for the latest Ford F250 and F350 models from the US market, to keep the pace and start Monday with a bang.

Key Features:
Type: Engine Control Unit (ECU).
Mode: OBD NR.
Readout: Software + Calibration.
MCU: TC387.
Read time: 7min 30sec.
Write time: 7min.
Checksums correction.

Compatibility List:
Models: F250 – P708 – 2023+ / F350 – P708- 2023+
Engines: 6.8L V8 / 7.3L V8

Sep. 2nd, 2025

NEW AUTOTUNER RELEASE!
Looks like Ford is not done with us, and neither is the US market. 🇺🇸
The Bosch MD1CP062 ECU is now fully supported in OBD mode with your AT Tool.

A compatibility built for the latest F250, F350 and F450, those road giants that pack serious power under the hood. A strong release, ready for action, for those who like tuning with attitude.

Key Features:
Type: Engine Control Unit (ECU).
Mode: OBD NR.
Readout: Software + Calibration.
MCU: TC389.
Read time: 7min.
Write time: 3min 30sec.
Checksums correction.

Compatibility List:
Models: F250 – P708 – 2023+ / F350 – P708- 2023+ / F450 – P708- 2023+
Engines: 6.7L V8 PowerStroke / 6.7L V8 TD PowerStroke

Related posts:

OBDII365