Here is the instruction to program key to a Land rover Range Rover KVM KF72 year 2015-2018 with Yanhua Mini ACDP. Add key and All keys lost procedure are the same.
There are two ways to program key for this model- by ICP (need KVM out) and OBD.
Both methods requires following
Module 9 for JLR with interface board
New JLR key that ID can be modified (i.e Lonsdor JLR smart key)
Original key if have a working key
OBD mode requires a double CAN Adapter as well
I. OBD Mode
Connect ACDP Mini with vehicle via double CAN adapter and obd extension cable
In ACDP Mini App, select
“Jaguar / Land Rover”.
->“OBD Duplicate key / All-key-lost (2011-2019)”.
Check video here for detail instructions
II. ICP Mode
Need KVM out but without soldering.
Mask: 9S12XEQ384
Back to ACDP. Install ACDP mini software on PC or mobile. (Check Download and Install ACDP PC Software)
Run ACDP Mini APP.
Select Jaguar/Land rover->ICP Add key/All keys lost (2015-)->KVM->KVM9S12XEQ384
Follow instructions to connect KVM solder-free adapter with KVM module and ACDP Mini
Well connection is built
Read and save Pflash
Read and save Dflash
Detect vehicle VIN and key information
2 keys programmed
Confirm VIN and press Continue
Power on ACDP, disconnect the OBP+ICP adapter from ACDP Mini device but keep the OBP+ICP adapter, KVM interface board and KVM module connected)
Then connect the ACDP device to the BAV-Key adapter and Insert a key ID can be modified into BAV-Key adapter
Read current key ID
Then select an unused key ID to write key
Programming key
Program key success
Reconnect ACDP Mini with OBP+ICP adapter, KVM interface board and KVM module
Write back EEPROM Dflash
No need to write back pflash.
Add key completed. Install KVM module back to car.
Test the new key see if it is working.
Done.
Read also:
How to Program JLR 2018+ Smart Key with Yanhua Mini ACDP Module 24?
