Tutorial: How to download, install, register and activate PCMTuner Fetrotech Tool plugin software. Fetrotech silver version and black standalone version share the same procedure.
1. Connect Device
Before installing software, connect fetrotech with computer and power supply
2. Download Fetrotech Tool
Visit www.tuner-box.com
Go to Download and download Fetrotech Tool software.
Download and extract fetrotech tool setup zip file to desktop
3. Install Fetrotech Software
Install Fetrotech Tool Setup.exe
Install driver until finished
Fill in user information as required to activate your device if the following dialog box appears
Full name, email, country and phone number
and Submit
Complete installation
Run Fetrotech Tool desktop shortcut
It will ask to activate the device
Press Control+V to copy the activation code and the device ID (on the back of the machine) to info@tuner-box.com
After activation, you will receive two license files, put the files in the corresponding locations and perform the corresponding operation
DON’T DELETE THESE LICENSE FILES!!!
Cut and paste Fetrotech Tool license file to disck C://
Cut and paste Fetrotech Tool ok3.5 file to C:\Program Files (x86)\Fetrotech folder, shown image below
Open Fetrotech Tool ok3.5 with Fetrotech Tool on C:\Program Files (x86)\Fetrotech folder
Now the device is activated.
5. Run software
Run Fetrotech Tool and software is ready to use
NOTE:
If have software flashback problem, click on the FetrotechToolSetup, select Repair Fetrotech and Finish
If failed to activate Fetrotec software follow the procedure above, delete, download and install Fetrotech software again.
Technical support from www.obdii365.com
